[U-Boot-Users] mtmsr causes an exception (it was "Problem wi

Jerry Van Baren gerald.vanbaren at smiths-aerospace.com
Wed Mar 26 13:20:37 CET 2003


What is the value you are moving into the MSR?  What processor are you 
using?  Is this a board with existing support or a custom board?  Does it 
work if you don't step through that instruction using the BDI2000?

gvb


At 04:04 PM 3/25/2003 -0500, r&d at wawnet.biz wrote:
>The problem I described in last post (see subject) is caused by the mtmsr
>instruction. In fact I have the same behaviour right at the beginning of
>the code. The tenth instruction just after reset (mtmsr r4), when executed
>under BDI2000 control, generates an exception and the CPU jumps to 0x700.
>I'm sure the CPU is in privileged mode (MSR=0x00000000).
>Anybody can help me?
>
>
>llandre



**********************************************************************
This e-mail and any files transmitted with it are confidential and may
be legally privileged or otherwise exempt from disclosure under
applicable law. This e-mail and its files are intended solely for
the individual or entity to whom they are addressed and their content
is the property of Smiths Aerospace.  If you are not the intended
recipient, please do not read, copy, use or disclose this communication.
If you have received this e-mail in error please notify the e-mail 
administrator at postmaster at si.com and then delete this e-mail, its
files and any copies.

This footnote also confirms that this e-mail message has been scanned
for the presence of known computer viruses.
***********************************************************************





More information about the U-Boot mailing list