[U-Boot-Users] Loads function and flow control.

[Christophe.LINDHEIMER at fr.thalesgroup.com]

> > Well, I use a serial line at 9600 Bauds.
> 
> :-(
> 
> > I use minicom to send commands to UBoot.
> > 
> > Once the loads is done I make a 
> >  cat hello_world.srec > /dev/ttyS1
> > in order not to use minicom to keep Wolfgang in good mood 
> for the whole week
> > :-))
> 
> Have you ever seen me in bad mood? This is a  _very_  uncommon  state
> for me.
> 
> > The first data are corrects but UBoot aborts the download 
> after a few
> > lines...
> 
> If you _must_ use s-records, use "cu".
> 
> Better avoid s-reocrds and use kermit binary protocol ("loadb").
> 
> Even better avoid serial downloads completely and use TFTP.
> 

Well, it should be with a lot of pleasure but hardware people have
"forgotten" ethernet link on my board :((


Chris