[U-Boot-Users] Loads function and flow control.

Wolfgang Denk wd at denx.de
Tue May 27 11:50:46 CEST 2003

In message <D96E2AFA0DF3D211B139009027454948037362A2 at helios.gnv.tcc.thomson-csf.com> you wrote:
> I have just installed the great rpm uucp to use cu.
> so I make cu -s 9600 -l ttyS1 --nostop.
> Unfortunately, it seems that what I type isn't sent to my board !!
> It works fine with minicom.
> It seems that it is because of the flow control.

You must configure the tool not to use flow control.

All this is documented in detail in http://www.denx.de/re/DPLG.html

Best regards,

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
On a clear disk you can seek forever.

More information about the U-Boot mailing list