[U-Boot-Users] ocdemon for initial u-boot flashing?

[Donald White]

Richard Klingler wrote:
> Good evening..
> 
> 
> Small off-topic question (o;
> 
> 
> Someone using OCDemon flash programmer for initial flashing
> of u-boot to a 8260 board?
>

I tried this once since I used the Wiggler successfully on an MPC860 project.  I 
couldn't get it to work.  Could not get support.  Bought BDI200 and have no problems.


> 
> Installed the demo version and it keeps saying that it can't
> run target code...or is unable to write to RAM location...
> 
> Was only once able to erase an existing old firmware...but that's all.
> Seems it needs some more initialisation than those offered
> in the software...
> 
> 
> Wrote a simple jtag flash program for Linux/Windows to do
> JTAG flashing but it takes some time for programming though (o;
> 
> 
> thanx for any hints
> rick
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive?  Does it
> help you create better code?   SHARE THE LOVE, and help us help
> YOU!  Click Here: http://sourceforge.net/donate/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users