[U-Boot-Users] RE: current simple 8260 platform as start...

Richard Klingler richard.klingler at violasystems.com
Fri Nov 7 17:48:37 CET 2003

Good evening (o;

I choosed the "atc" platform (o;

Needs some flash adjustments though...
At least for the first compilation try not bad:

U-Boot 1.0.0 (Nov  7 2003 - 14:20:49)

MPC8260 Reset Status: External Soft, External Hard

MPC8260 Clock Configuration
 - Bus-to-Core Mult 2.5x, VCO Div 2, 60x Bus Freq  40-120, Core Freq 100-240
 - dfbrg 0, corecnf 0x06, busdf 3, cpmdf 1, plldf 0, pllmf 1
 - vco_out  200000000, scc_clk   50000000, brg_clk   50000000
 - cpu_clk  125000000, cpm_clk  100000000, bus_clk   50000000

CPU:   MPC8260 (HiP3 Rev 01, Mask A.1 1K22A-XC) at 125 MHz
Board: VDSL-OR1
DRAM:  32 MB
Top of RAM usable for U-Boot at: 02000000
Reserving 154k for U-Boot at: 01fd9000
Reserving 128k for malloc() at: 01fb9000
Reserving 76 Bytes for Board Info at: 01fb8fb4
Reserving 72 Bytes for Global Data at: 01fb8f6c
Stack Pointer at: 01fb8f48
New Stack Pointer is: 01fb8f48
Now running in RAM - U-Boot at: 01fd9000
FLASH: ## Unknown FLASH on Bank 0 - Size = 0x00000000
 0 kB
In:    serial
Out:   serial
Err:   serial
U-Boot relocated to 01fd9000
### main_loop entered: bootdelay=5

### main_loop: bootcmd="version;echo;bootp;setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpa
th) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;bootm"
Hit any key to stop autoboot:  0 

nice weekend

More information about the U-Boot mailing list