[U-Boot-Users] Porting u-boot to custom MPC852T board.

[Wolfgang Denk]

Dear David,

in message <OF2B4ACBB0.E5841A39-ON85256DDF.00204F37 at nanometrics.ca> you wrote:
> 
> I'm currently porting u-boot version 0.4.8 to our custom board running an
> MPC852T.  The processor is configured to high-boot at 0xfff00000.  U-boot
> is failing to execute any instructions in RAM after it has been relocated.

This is a FAQ. It has been asked - and answered! - many times  before
on the lists.

See http://www.denx.de/twiki/bin/view/DULG/UBootCrashAfterRelocation

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
How many QA engineers does it take to screw in a lightbulb? 3:  1  to
screw it in and 2 to say "I told you so" when it doesn't work.