[U-Boot-Users] Intel 28F256K3 support

Robert Schwebel robert at schwebel.de
Tue Nov 18 07:24:40 CET 2003

On Mon, Nov 17, 2003 at 07:35:13PM -0800, Raghu wrote:
> I am not particular in using them as K3s, how do I use them in J3
> Mode??

You can use the innokom directory as an example, it works with K3 in
compatiblity mode. Copy board/innokom/flash.c over to your board
directory and change it and the config header file according to your
needs. You also have to take care of the timing initialisation for the
flash in your CPU specific init part.  

 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hornemannstraße 12,  31137 Hildesheim, Germany
    Phone: +49-5121-28619-0 |  Fax: +49-5121-28619-4

  Visit us at the SPS/IPC/Drives in Nuernberg, H10/340!

More information about the U-Boot mailing list