[U-Boot-Users] Re: U-Boot for AT91RM9200DK

[Steven Scholz]

Hi Rick,

>>Should we put all the init code into cpu/at91rm9200/{start.S} and use CONFIG_ 
>>and CFG_?
> 
>   I'd put it all in start.S and not define any CONFIG for it.
Hmm. But my boards has a completly different clocking scheme!
For instance: I use an 16MHz external clock oszillator. The eval board has an 
18,xxx MHz crystal...
So we need at least some CFG_'s for clock configuration.

Ok?

-- 
Steven Scholz

imc Measurement & Control               imc Meßsysteme GmbH
Voltastr. 5                             Voltastr. 5
13355 Berlin                            13355 Berlin
Germany                                 Deutschland
fon: +49 30 467090-0                    Tel: 030 / 467090-0
fax: +49 30 4631576                     fax: 030 / 4631576