[U-Boot-Users] How Can I NAND Command Enable?

Jacob Chan jacob_chan at so-net.net.tw
Thu Oct 30 09:59:24 CET 2003


I think you can add CFG_CMD_NAND in your include/configs/smdk2410.h
like
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NAND )

Best regards,

Jacob Chan

-----Original Message-----
From: u-boot-users-admin at lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf Of 譆惜橾
Sent: Thursday, October 30, 2003 4:06 PM
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] How Can I NAND Command Enable?


Dear all,
I am using u-boot-0.4.8 to boot my SMDK2410 (ARM9 ).
SMDK2410 Board has NAND Flash Memory
I Know U-Boot has nand control command but my configuration does not
enable nand command . How can I enable nand command in U-Boot
Thanks.

Best regards,
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?   SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users



-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?   SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users






More information about the U-Boot mailing list