[U-Boot-Users] Help with u-boot 0.4.0 and IBM ASH board
Eric.Wetterlind at goodrich.com
Thu Oct 30 21:46:14 CET 2003
I have an IBM ASH (NPe405h) board that I am trying to get U-Boot 0.4.0
Ultimately, I'll port this over to our custom board that is very similar to
but I figured it would be better to start on a known platform.
I downloaded the new 0.4.0 U-Boot and ran these two commands (after
the Makefile to run 'ppc_405-' instead of 'ppc_8xx'):
It flew through compile and link to produce the nice u-boot.srec. I put
my tftpboot directory, telnet'd over to the abatron 2000, erased ASH flash
programmed this new image in there.
The result is an immediate SystemError LED illumination.
I then switched from Flash to SRAM (one of the dips on the ASH board) and
Running from SRAM produces a program exception and jump to 0x700 almost
I am running out of ideas on how to get U-boot and my ash board to
anyone else that has tried this had the same problems?
Eric (eric.wetterlind at goodrich.com)
More information about the U-Boot