[U-Boot-Users] pcmcia card not set up by u-boot on tqm823l

[Wolfgang Denk]

In message <1063117428.3298.101.camel at xerxes.hypercube> you wrote:
>
> Ok, the problem was the bdi setup files that I was using to program
> u-boot onto my tqm module.
> 
> The bdi setup files (TQM8xxL.cfg and reg823.def) caused odd problems
> such as the one above and also the problem I was having with an rtai
> module not functioning.

Check the SIUMCR  settings.  Some  modes  (debugging  /  PCMCIA)  are
mutually exclusive.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
You Don't Have To Be 'Damned' To Work Here, But It Helps!!!
                                             - Terry Pratchett, _Eric_