[U-Boot-Users] Unable to compile the U-boot-0.4.8 version for OMAP1610/1510/smdk2410

[George G. Davis]

Wolfgang Denk wrote:
> Dear George,
> 
> in message <3F61D58D.7090308 at comcast.net> you wrote:
> 
>>Um, it's not the cross compiler that's doing it in this case. gccincdir
>>is not defined for drivers/sk98lin. Try the attached patch. It WFM/YMMV.
> 
> 
> Well, gccincdir is not needed for drivers/sk98lin/* -  at  least  not
> with  the  compilers  used  in  the  ELDK.

Hm, that's odd. FWIW, I just tested:

	ftp://ftp.leo.org/pub/eldk/2.1.0/eldk-arm-linux-x86

and it has the exact same build failure as:

	ftp://ftp.arm.linux.org.uk/pub/armlinux/toolchain/cross-2.95.3.tar.bz2

Due to:

	make[1]: Entering directory `/Projects/OSS/cvs.sourceforge.net/u-boot/u-boot/drivers/sk98lin'
	arm-linux-gcc ... -isystem /usr/lib/gcc-lib/i386-redhat-linux/2.96/include ... -c -o skge.o skge.c

W/o the patch. But I'm just being pedantic now.  : )


 > Also, I seriously doubt if
> drivers/sk98lin is actually used by the omap1610inn board.

Correct, it's not used for omap1610inn board. But it gets built
anyway and causes the build to fail due to "-isystem $(gccincdir)"
where gccincdir is not explicitly defined and is probably just
picking up a default from some builtin makerules or something?

--
Regards,
George

> 
> 
>>--- drivers/sk98lin/Makefile.orig	Fri Sep 12 10:15:26 2003
>>+++ drivers/sk98lin/Makefile	Fri Sep 12 10:11:56 2003
>>@@ -25,6 +25,8 @@
>> # Makefile for the SysKonnect SK-98xx device driver.
>> #
>> 
>>+include $(TOPDIR)/config.mk
>>+
> 
> 
> But this patch is OK anyway. Thanks for the hint.
> 
> Best regards,
> 
> Wolfgang Denk
>