[U-Boot-Users] u-boot complier linke problem

tang kelphon kelphon at hotmail.com
Fri Apr 2 11:51:39 CEST 2004


When i make my board
i found $UNDEF_SYM do not work 

the following is the make's output is this right? 
i think this maybe cause my bl start_armboot error
----------------------------------------------------------------------------------------

arm-linux-ld -Bstatic -T 
/arc_soft/user/kelphon/embed/u-boot-1.0.0/board/greenlake/u-boot.lds -Ttext 
0xa0000100  $UNDEF_SYM cpu/pxa/start.o \
                --start-group board/greenlake/libgreenlake.a 
cpu/pxa/libpxa.a lib_arm/libarm.a fs/jffs2/libjffs2.a fs/fdos/libfdos.a 
fs/fat/libfat.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a 
drivers/libdrivers.a drivers/sk98lin/libsk98lin.a post/libpost.a 
post/cpu/libcpu.a common/libcommon.a lib_generic/libgeneric.a -L 
/arm/lib/gcc-lib/arm-linux/2.95.3 -lgcc --end-group \
                -Map u-boot.map -o u-boot
arm-linux-objcopy --gap-fill=0xff -O srec u-boot u-boot.srec
arm-linux-objcopy --gap-fill=0xff -O binary u-boot u-boot.bin

_________________________________________________________________
与联机的朋友进行交流,请使用 MSN Messenger:  http://messenger.msn.com/cn  





More information about the U-Boot mailing list