[U-Boot-Users] Passing parameters

Thu Dec 2 10:42:35 CET 2004

In message <2BD8691E843F3C4F901DB602E96AEAF10E13A8 at mailsrv01.tecdis.com> you wrote:
> 
> I'm already here with a new question.

...and with two violations of the list's posting rules.

> My problem is passing bootarg on my kernel.
>  
> I set bootargs on u-boot with
>     set bootarg=root=/dev/ram rw  mem=64M console=ttyS0,115200n8 initd=0xA2A00000,8M
>  but after bootm command ( bootm 40000 )
> the kernel sto with this message
> Uncompressing Linux........................................................ done
> , booting the kernel.
>  
> where I mistake ?

#1: Not reading the manual, especially the FAQ section. See
    http://www.denx.de/twiki/bin/view/DULG/LinuxHangsAfterUncompressingKernel

> ------_=_NextPart_001_01C4D7B1.8FFD0AC8
> Content-Type: text/html;
> 	charset="iso-8859-1"
> Content-Transfer-Encoding: quoted-printable
> 
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">

#2: NEVER post HTML to this list!!!

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I've seen it. It's rubbish."          - Marvin the Paranoid Android