[U-Boot-Users] question related to Start.s (mpc8248)

[Yuli Barcohen]

>>>>> Vikrant Basotra writes:

    Vikrant> I am working on ep8248 board.

I already ported U-Boot to this board. I'm preparing patch which I'll
send to this list soon.

    Vikrant> I have the full U-boot code but in the cpu folder I didn't
    Vikrant> find any mpc8248/mpc8272 folder,

...because 8248 belongs to 8260 family. The folder you need is mpc8260.

    Vikrant> but there is a folder named mp824x.  I have read somewhere
    Vikrant> that the mpc824x and mpc8248/mpc8272 processors belong to
    Vikrant> different families.

MPC8248 is a PowerQUICC II chip (communication controller) while mpc824x
folder is for integrated processors (8245 et al). These really are two
different families.

    Vikrant> Since I need the start.s file for mpc8248 processor, can I
    Vikrant> use the start.s file of the cpu/mpc824x, If not then could
    Vikrant> you please tell me that from where I could get the start.s
    Vikrant> file for the mpc8248 processor.

-- 
========================================================================
 Yuli Barcohen       | Phone +972-9-765-1788 |  Software Project Leader
 yuli at arabellasw.com | Fax   +972-9-765-7494 | Arabella Software, Israel
========================================================================