[U-Boot-Users] Re: Problem about applications in Lite5200 Board

Wolfgang Denk wd at denx.de
Thu Dec 9 12:11:20 CET 2004


In message <1102579196.11361.17.camel at localhost.localdomain> you wrote:
>
>   Sorry for bothering you again.
>   Last time, IDE disk can't work well. With your guide to set the IDE as
> master mode, then IDE disk work well.
>   But now another question after I install busybox and tinylogin in
> Lite5200 board. When power up, the system display message:

Sorry, but this is complretely off topic on the U-Boot mailing list.

> Bad inittab entry: id:3:initdefault:
> Bad inittab entry: pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure;
...
> Before I install busybox and tinylogin, kernel power up normally, But
> after I install busybox and tinylogin to "/opt/eldk/ppc_82xx" , kernel
> display wrong message alert.
>    Could you suggest me how to handle this problem?

Yes: RTFM.

If you want to use busybox, you are  expected  to  read  the  related
information,  and  configure  your  system as required by busybox. In
your case, at least the /etc/inittab file must be adapted  as  needed
for busybox. This is all documented, so please read the documentation.

And please don't post such questions  on  the  U-Boot  mailing  list,
where they are off topic.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Always try to do things in chronological order; it's  less  confusing
that way.




More information about the U-Boot mailing list