[U-Boot-Users] MX1ADS board

[mike]

Dear all

    I am using CVS u-boot on mx1ads with syncflash. But i found that the 
default board config load the kernel from 0x8800 0000, which is ram 
address.
    What i am going to do is to port u-boot to MXL platform with AMD NOR 
flash, Do anyone try that before?
    Also, i see that there is usbtty on OMAP platform, MX1/MXL is also 
embedded a usb1.1 client port. Could anyone please tell me how to start 
to port on MX1/MXL? or anyone try that before?

    I am new to this place, if i make any things wrong, please tell me.
    Thanks for helping
best regard
Mike,Lee