[U-Boot-Users] [PATCH] New board support for the Xilinx ML300 platform

[Mike Wellington]

Peter-
  Thanks.  I had already applied the patch incorrectly and mangled my 
build tree.  
But I re-un-hacked it and I am now building u-boot for the ML300.   I have
downloaded it and it is running right now.   If I start having 
unexplainable problems
I'll start fresh with the latest top-of-tree and re-apply the patch 
according to
your instructions.
 
All I need to do is to figure out how to set the ethernet address (no 
help needed here)
and download my kernel which is already built.   

I may be gone for an hour or two - getting hungry, may walk over to CB & 
Potts for
dinner but I'll be back.

Thanks a million!


-mike

Peter Ryser wrote:

> Mike,
>
> the patch applies cleanly against the latest CVS kernel tree. After 
> checking out the CVS tree from sourceforge (see 
> http://sourceforge.net/cvs/?group_id=65938 for instructions, use 
> u-boot as modulename) change into the root directory of U-Boot and do:
> $ gzip -cd ml300.patch.gz | patch -p1 -F0 --dry-run
>
> If that goes well remove --dry-run to really apply the patch.
>
> - Peter
>
>
> Mike Welliington wrote:
>
>> Great! - I've been working on a port of PPCBoot to the ML300, but got
>> yanked off to work on our kernel port, which we are booting without a
>> bootloader for the time being.  But I knew I was going to have to
>> come back and finish the port anyway - you just saved me.
>>
>> I'm new to U-Boot so:
>>
>>  1)  Is this patch intended to be applied to U-Boot 1.0.0 ?
>>
>>  2)  Where can I find out how to apply the patch?
>>
>> Best Regards,
>>
>> -mike wellington
>> wellington at lucent.com
>> Denver, Colorado,  USA
>>
>>
>>  
>>
>>
>>
>>
>> Peter Ryser wrote:
>>
>>> At ftp://customer:xilinx@ftp.xilinx.com/upload/ml300.patch.gz find a 
>>> patch that adds support for the Xilinx ML300 platform to U-Boot. 
>>> Some documentation is provided in doc/README.ml300.
>>>
>>> The CHANGELOG entry is attached to this email.
>>>
>>> Please apply the patch to the repository.
>>>
>>> Thanks and with best regards,
>>> - Peter
>>>
>>> ------------------------------------------------------------------------ 
>>>
>>>
>>> * Patch by Peter Ryser, 20 Feb 2004:
>>>  Add support for the Xilinx ML300 platform
>>>  (http://www.xilinx.com/ml300).
>>>
>>>
>>>
>>>
>>>
>>>  
>>>
>>
>> ------------------------------------------------------- SF.Net is 
>> sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps 
>> & Web services for Linux with a free DVD software kit from IBM. Click 
>> Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click 
>> _______________________________________________ U-Boot-Users mailing 
>> list U-Boot-Users at lists.sourceforge.net 
>> https://lists.sourceforge.net/lists/listinfo/u-boot-users 
>
>
>
>
>
> -------------------------------------------------------
> SF.Net is sponsored by: Speed Start Your Linux Apps Now.
> Build and deploy apps & Web services for Linux with
> a free DVD software kit from IBM. Click Now!
> http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users



-- 

=mike wellington
wellington at lucent.com
303.920.6412  Desk
720.434.7559  Cell