[U-Boot-Users] Wind River visionProbe II

VanBaren, Gerald (AGRE) Gerald.VanBaren at smiths-aerospace.com
Tue Jan 13 23:23:06 CET 2004


My suggestion: sell it on eBay as a spare.  If someone is using a visionIce, it is nice to have backup hardware in case one goes <poof>.

gvb


> -----Original Message-----
> From: u-boot-users-admin at lists.sourceforge.net
> [mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of 
> Joe Hamman
> Sent: Tuesday, January 13, 2004 5:12 PM
> To: Ryan Pipkin; u-boot-users at lists.sourceforge.net
> Subject: RE: [U-Boot-Users] Wind River visionProbe II
> 
> 
> Unfortunately, no.  The logic in the device is SRAM-based and
> proprietary.  If it were a cheap "bit-wiggler", there might be a
> possibility.
> 
> Regards,
> Joe
> 
> 
> -----Original Message-----
> From: u-boot-users-admin at lists.sourceforge.net
> [mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of Ryan
> Pipkin
> Sent: Tuesday, January 13, 2004 8:40 AM
> To: u-boot-users at lists.sourceforge.net
> Subject: [U-Boot-Users] Wind River visionProbe II
> 
> 
> Wind River visionPROBE II
> I received one of these units for xscale in an eval kit.  
> They offered a
> 30 day trial period for the software but we never took them up on it.
> We purchased the bdi2000 and have been happy.  Can I do anything with
> this hardware without their software?  Has anyone been able 
> to use it to
> program flash?  I would hate to throw it away, but it seems to be
> useless.
> 
>     Thanks.
> 
> >
> >
> 
> 
> 
> 
> --------------------------------------------------------------
> ----------
> Confidentiality Notice:   This e-mail transmission may contain
> confidential and/or privileged information that is intended 
> only for the
> individual or entity named in the e-mail address. If you are not the
> intended recipient, you are hereby notified that any disclosure,
> copying, distribution or reliance upon the contents of this e-mail
> message is strictly prohibited. If you have received this e-mail
> transmission in error, please reply to the sender, so that proper
> delivery can be arranged, and please delete the message from your
> computer.  Thank you.
> Inet Technologies, Inc.
> --------------------------------------------------------------
> ----------
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: Perforce Software.
> Perforce is the Fast Software Configuration Management System offering
> advanced branching capabilities and atomic changes on 50+ platforms.
> Free Eval! http://www.perforce.com/perforce/loadprog.html
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 



******************************************
The information contained in, or attached to, this e-mail, may contain confidential information and is intended solely for the use of the individual or entity to whom they are addressed and may be subject to legal privilege.  If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager.  Please do not copy it for any purpose, or disclose its contents to any other person.  The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company.  The recipient should check this e-mail and any attachments for the presence of viruses.  The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email.
******************************************




More information about the U-Boot mailing list