[U-Boot-Users] BDI/flash question
George G. Davis
davis_g at comcast.net
Thu Jan 15 04:40:04 CET 2004
On Wed, Jan 14, 2004 at 08:44:30PM -0600, Ed Okerson wrote:
>
> After spending the time (and money) on getting the BDI2000 and u-boot
> working on the DBAU1500 board, our hardware guys finally delivered me a
> couple of our own design boards with Au1500 processors on them. I
> connected the BDI2000 to one of our boards, and when it wouldn't erase the
> flash and after a call to the HW engineer, found out that it has a
> different flash. OK, changed the flash type to the correct one, and also
> the bus width was changed to 16 as opposed to the 32 on the DBAU1500. The
> BDI will now erase and program the flash, but u-boot won't come up. After
> a bit of digging I found that after an erase the flash looks like this:
>
> BDI>md 0xbfc00000
> bfc00000 : 0000ffff 0000ffff 0000ffff 0000ffff ................
> bfc00010 : 0000ffff 0000ffff 0000ffff 0000ffff ................
> bfc00020 : 0000ffff 0000ffff 0000ffff 0000ffff ................
> bfc00030 : 0000ffff 0000ffff 0000ffff 0000ffff ................
>
> and on, and on.....
>
> Does anyone have any idea what could cause this? Our HW guy is pouring
I've no idea really, but have you verified correct BUSWIDTH, e.g.:
BUSWIDTH {8,16,32}?
--
Regards,
George
> over the schematics trying to find something, but I want to make sure it
> isn't something stupid I did on the BDI2000 config.
>
> Ed Okerson
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Perforce Software.
> Perforce is the Fast Software Configuration Management System offering
> advanced branching capabilities and atomic changes on 50+ platforms.
> Free Eval! http://www.perforce.com/perforce/loadprog.html
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
More information about the U-Boot
mailing list