[U-Boot-Users] HID0 Register problem

[Wolfgang Denk]

In message <20040119153933.89961.qmail at web10608.mail.yahoo.com> you wrote:
> 
> Implementation-dependent Registers (HID0). But when we
> enable this portion of code, U-boot hangs once it
> relocates itself to the RAM. In this condition, though
> U-boot configures HID0 register, still the value is
> ZERO.
> 
> IS this because of improper SDRAM initialization? How

Most probably yes.

> do I verify  the burst mode operation of SDRAM? Is

Boot Linux. 

> there any debug routine similar to mtest available for
> the same?

No. Not yet. Please feel free to contribute one.

Best regards,

Wolfgang Denk

-- 
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Misquotation is, in fact, the pride and privilege of the  learned.  A
widely-read  man  never  quotes  accurately,  for  the rather obvious
reason that he has read too widely.
                - Hesketh Pearson _Common Misquotations_ introduction