[U-Boot-Users] Re: System hangs when Linux is loaded

[Wolfgang Denk]

In message <BAY2-F16fNtS5kJla9G0001ed04 at hotmail.com> you wrote:
> 
> I have a Walnut board with ppc405. I have manged to install u-boot on the 
> board. I can download linux image (I am using Monta Vista one) too. But when 
> I tried to use "bootm", the system hanged after showing
> "## Transferring control to Linux (at address 00000000) ..."
> 
> The following is the dump of serial console output. The uImage-uncomp is the 
> uncompressed linux image created with tools/mkimage, as explained in README 
> file. Does anyone have the same problem?

Which problem? Not reading the FAQ section of the DULG?

Yes, this seems to be a fairly common problem, but I have no idea how
to fix it.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Military secrets are the most fleeting of all.
	-- Spock, "The Enterprise Incident", stardate 5027.4