[U-Boot-Users] u-boot 1.1.1 does NOT work on at91rm9200

[Hamid IKDOUMI]

Hi,

I've build u_boot 1.1.1 for the at91rm9200dk board and it runs well.
Verify that TEXT_ADDR in board/at91rm9200dk/config.mk is compliant with your
load address in sdram.

Hamid

-----Original Message-----
From: u-boot-users-admin at lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of Kögler
Peter
Sent: jeudi 1 juillet 2004 12:01
To: 'u-boot-users at lists.sourceforge.net'
Subject: [U-Boot-Users] u-boot 1.1.1 does NOT work on at91rm9200


hi,
i try to run u-boot 1.1.1 on our custom-board, but it does not start at all.

Our board runs already with u-boot 0.4.0. We use an urloader to do basic
initialization and then unpack u-boot to ram. after u-boot we start linux.
every thing works.

I transfered our board specific settings from the 0.4 u-boot to the 1.1
u-boot. But u-boot does not start at all.

does anybody had the same problem?

wbr
peter


--------------------------------------------------------------
Peter Kögler
EL-ME AG
Gewerbering 1
D-84072 Au i. d. Hallertau

Tel.:     +49 / 8752 / 864 - 527
Fax.:     +49 / 8752 / 864 - 100
mailto.:  p.koegler at el-me.de
Web:      www.el-me.de



-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users