[U-Boot-Users] do_bootm_linux problem

[Wolfgang Denk]

Hello,

in message <40EEA9A9.21600.1528F53 at localhost> you wrote:
> 
> I try port U-Boot 1.1.1 to a board with MPC8280.

I recommend to use the top-of-trunk in the CVS for all ongoing work.

> It seems to work but booting the Linux kernel failed without any print after
> "Uncompressing Kernel Image ... OK"
> I have already checked the cases mentioned in DULG 13.2.5.

execellent!

> I found that within the function do_bootm_linux the pointer "kernel" is 0.

Whichi s perfectly OK.

> Within the global structure header I found the following:

This does not matter here at all.

> The kernel is the one shipped with ELDK 3.0 made by make uImage.
> 
> What could be wrong?

The adaption of the Linux kernel for your board? 

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
				 EARTH
			     smog  |   bricks
			 AIR  --  mud  --  FIRE
			soda water |   tequila
				 WATER