[U-Boot-Users] Debugging U-Boot Under DDD

[Wolfgang Denk]

In message <20040713175734.30201.qmail at web50506.mail.yahoo.com> you wrote:
> I tried loading elf file, this is what I get
> 
> BDI>erase 0x02000000 chip
> Erasing flash at 0x02000000
> Erasing flash passed
> BDI>prog 0x02000000 u-boot elf
> Programming u-boot , please wait ....
> - File offset 0x00000078 to address 0x04000000 size 131408
> # Programming flash memory failed at 0x04000040

You misunderstood. I was talking about loading the ELF file  in  GDB,
not  about  programming it to flash using the BDI's telnet interface.
These are completely different things.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Always leave room to add an explanation if it doesn't work out.