[U-Boot-Users] LITE5200 board: Bus Fault with 2 network cards
gheard at zoominternet.net
Tue Jul 20 15:56:18 CEST 2004
As it happens, I'm adding a board entry for the Cogent CSB337. I'm
new to gdb debugging and am unsure on setting up the bdi2000 for this. I
have followed the steps in the bdi manual but they are quite lacking.
Do you have anything written on the typical bdi setup for debugging u-boot?
Glenn Heard gheard at zoominternet.net
Software Engineer gheard at altronicinc.com
Altronic Inc. www.altronicinc.com
A politician is a person who can tell you to go
to hell and make you feel good to be on your way.
> -----Original Message-----
> From: u-boot-users-admin at lists.sourceforge.net
> [mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf
> Of Wolfgang Denk
> Sent: Tuesday, July 20, 2004 9:38 AM
> To: Olivier Singla
> Cc: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] LITE5200 board: Bus Fault with 2
> network cards
> The recommended (most efficient) way to debug the system is
> with a BDI, though.
> Best regards,
> Wolfgang Denk
> Software Engineering: Embedded and Realtime Systems, Embedded Linux
> Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email:
> wd at denx.de If it has syntax, it isn't user friendly.
> This SF.Net email is sponsored by BEA Weblogic Workshop
> FREE Java Enterprise J2EE developer tools!
> Get your free copy of BEA WebLogic Workshop 8.1 today.
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
More information about the U-Boot