[U-Boot-Users] using BDI200 to access RAM
Vladimir_Levertov at mksinst.com
Vladimir_Levertov at mksinst.com
Wed Jun 2 15:39:37 CEST 2004
Hello,
I work with custom board based on MPC850.
This board has 8MB flash on address 0xff800000
I try to access (get/set) memory using BDI2000 telnet API (MD/MM)
Unfortunately all memory I can see is the flash. It appears on address 0
(MD 0) and returns every 8MB.
Command PHYS 0 (map physical address) returns 0.
How can I access DRAM using BDI telnet API?
Thanks in advance.
=====================
Vladimir Levertov
Senior Software Engineer
MKS Instruments
Tel: +972-8-9181010
Fax: +972-8-9181020
=====================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20040602/afb2c4cb/attachment.htm
More information about the U-Boot
mailing list