[U-Boot-Users] Re: csb337

[Jean-Philippe Francois]

>In message <0c3501c448c4$4c72fa50$6b01a8c0 at cc> you wrote:
>> 
>> 180 MHz ARM920T Core (AT91RM9200 microcontroller)
>> 32 Mbyte SDRAM, 8Mbyte Flash
>> ...
>> 
>> Other information here :
>> http://www.unicoi.com/embedded_tools/csb337_atmelat91rm9200.htm
>
>This board is not listed in the list of supported AT91RM9200 boards.
>

But the already supported card (Atmel's DK) is a good start.
I used it for a custom board.
Note however that in the current state you cannot boot directly on U-boot,
you need a first level bootloader, like the one provided by Atmel. 

JP Francois