[U-Boot-Users] bootm image problem

[wyu hotmail]

Hi,

I'm trying to boot linux image, I do as follow:

1. set env and saved into flash, passed
2. tftpboot, image was loaded into 0x400000 (SDRAM on board 32MB), passed
3. bootm
I got the following information:
## Booting image at 00400000 ...
   Image Name:   Linux Kernel Image
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    603024 Bytes = 588.9 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Current stack ends at 0x01FA2598 => set upper limit to 0x00800000
## cmdline at 0x007FFC00 ... 0x007FFC50
bd address  = 0x01FA2F84
memstart    = 0x00000000
memsize     = 0x02000000
flashstart  = 0x10000000
flashsize   = 0x00200000
flashoffset = 0x00000000
sramstart   = 0x00000000
sramsize    = 0x00000000
bootflags   = 0x0000A000
procfreq    = 266.666 MHz
plb_busfreq = 133.333 MHz
pci_busfreq = 33.333 MHz
ethaddr     = 00:E5:00:08:0F:E5
IP addr     = 128.127.18.3
baudrate    =   9600 bps
No initrd
## Transferring control to Linux (at address 00000000) ...

then system seems halt: nothing in terminal anymore.

what's the possible problem?

Thanks,

yuwp