[U-Boot-Users] MPC8272ADS & U-Boot 1.1.1 (Second Try)

Juergen Selent j.selent at elmeg.de
Wed Jun 23 15:16:07 CEST 2004


Hi,

its the second try without base64, sorry for that (I hate Outlook grrr).

Currently I am using U-Boot 1.0.0/Linux 2.4.22 with an MPC8272ADS-Board without any problems. Now I wanna upgrade to U-Boot Version 1.1.1 and I run into the following problem:

U-Boot starts up without any problems, it loads the linux kernel image (uImage) via TFTP. The checksum of the imgae is correct, uncompressing works fine, but than the kernel does not start up. All I get is a immediate reboot into U-Boot. Cause is a CHECKSTOP EXCEPTION. Its the same kernel image which works great under U-Boot 1.0.0. Any ideas? Here is the log:

U-Boot 1.1.1 (Jun 23 2004 - 13:24:00)

MPC8272 Reset Status: External Soft, External Hard

MPC8272 Clock Configuration
 - Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq  25-75 , Core Freq 100-300
 - dfbrg 1, corecnf 0x0a, busdf 3, cpmdf 1, plldf 0, pllmf 3
 - vco_out  400000000, scc_clk  100000000, brg_clk   25000000
 - cpu_clk  400000000, cpm_clk  200000000, bus_clk  100000000
 - pci_clk   66666666

CPU:   MPC8272 (HiP7 Rev 13, Mask 0.0 0K50M) at 400 MHz
Board: Motorola MPC8272ADS
DRAM:  64 MB
FLASH:  8 MB
In:    serial
Out:   serial
Err:   serial
Net:   FCC1 ETHERNET
Hit any key to stop autoboot:  3-2-1-0
Using FCC1 ETHERNET device
TFTP from server 10.0.0.136; our IP address is 10.0.0.201
Filename 'uImage'.
Load address: 0x400000
Loading: #################################################################
         #################################################################
         #########
done
Bytes transferred = 709133 (ad20d hex)
## Booting image at 00400000 ...
   Image Name:   Linux Kernel Image
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    709069 Bytes = 692.5 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

--- NOW A RESET OCCURS ---

U-Boot 1.1.1 (Jun 23 2004 - 13:24:00)

MPC8272 Reset Status: Check Stop, External Soft, External Hard


Thanx
--
Juergen Selent
Elmeg Communcation Systems GmbH
Development Office Berlin
Alt-Moabit 96c
10559 Berlin





More information about the U-Boot mailing list