[U-Boot-Users] Where is flash_init() after u-boot relocated to RAM?

[Wolfgang Denk]

In message <20040624190822.79124.qmail at web20727.mail.yahoo.com> you wrote:
> 
> Ch. 10 of DULG says that the relocation address is usually (RAM_SIZE -
> MONITOR_LEN). So in my case the relocation address should be 0x7fc0000
> (0x8000000 - 0x40000). But from the debugging message I found u-boot is
> at 0x7fd9000 after relocation. Do they conflict?

This is a part where the DULG needs updating;  the  problem  is  that
it's not easy to explain.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Leave bigotry in your quarters; there's no room for it on the bridge.
	-- Kirk, "Balance of Terror", stardate 1709.2