[U-Boot-Users] u-boot and 2.4.18 kernel problem

[Wolfgang Denk]

In message <294FD9D3403A0340BDAC38E48DCEFFDC9355A2 at RES-EXCH> you wrote:
> 
> My board runs at 49.152 MHz and has 16MB flash and 32 MB SDRAM. I have
> checked my SDRAM UPMA settings and cannot find anything wrong with it.

Then check the rest of the SDRAM initialization  sequence,  which  is
much more important that the UPM settings. Yes, this is a FAQ.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
"In the face of entropy and nothingness, you kind of have to  pretend
it's  not  there  if  you  want  to  keep writing good code."
- Karl Lehenbauer