[U-Boot-Users] [PATCH] New ADS GraphicsClient+ board port

George G. Davis davis_g at comcast.net
Thu Mar 11 21:28:29 CET 2004


On Thu, Mar 11, 2004 at 02:56:24PM -0500, Brad Kemp wrote:
> George,
> What problem did you have with the CFI flash driver?

Couldn't detect flash. I didn't try to debug it much beyond that since
I already had the flash.c ported from a few months ago. So I punted
with that for now. I took a look at that common CFI flash driver and
had the opinion that the BE/LE support could/should probably be done
better, e.g. via appropriate use of cpu_to_{le,be{8,16,32,64}
macros. But that was just an opinion drawn from a mere glance at
the source.

--
Regards,
George


> Brad
> 
> > -----Original Message-----
> > From: George G. Davis [mailto:davis_g at comcast.net] 
> > Sent: Thursday, March 11, 2004 2:17 PM
> > To: u-boot-users at lists.sourceforge.net
> > Subject: [U-Boot-Users] [PATCH] New ADS GraphicsClient+ board port
> > 
> > 
> > Greetings,
> > 
> > I humbly submit this trivial board port for the ADS 
> > GraphicsClient+. This
> > SA-1110 based board is actually EOL but it's still useful to 
> > me for Linux
> > development/testing. I'll eventually make this thing use the 
> > common CFI
> > flash support instead of the flash.c included here. But for now I was
> > unable to get the CFI flash support working on this target.
> > 
> > This patch is based on latest CVS HEAD +/- a few hours.
> > 
> > Thanks!
> > 
> > --
> > Regards,
> > George
> > 
> > 
> > diff -x CVS -ruN u-boot.orig/board/gcplus/config.mk 
> > u-boot.new/board/gcplus/config.mk
> > --- u-boot.orig/board/gcplus/config.mk	1969-12-31 
> > 19:00:00.000000000 -0500
> > +++ u-boot.new/board/gcplus/config.mk	2003-11-06 
> > 00:36:23.000000000 -0500
> > @@ -0,0 +1,13 @@
> > +#
> > +# ADS GCPlus board with SA1110 cpu
> > +#
> > +# The ADS GCPlus has 2 banks of 16 MiB SDRAM
> > +#
> > +# We use the ADS GCPlus Linux boot ROM to load U-Boot into SDRAM
> > +# at c020'0000 and then move ourself to c8f0'0000. Basically, just
> > +# install the U-Boot binary as you would the Linux zImage and then
> > +# reap the benfits of more convenient Linux development cycles, i.e.
> > +# bootp;tftp;bootm, repeat, etc.,.
> > +#
> > +
> > +TEXT_BASE = 0xc8f00000
> > diff -x CVS -ruN u-boot.orig/board/gcplus/flash.c 
> > u-boot.new/board/gcplus/flash.c
> > --- u-boot.orig/board/gcplus/flash.c	1969-12-31 
> > 19:00:00.000000000 -0500
> > +++ u-boot.new/board/gcplus/flash.c	2003-12-09 
> > 11:29:34.000000000 -0500
> > @@ -0,0 +1,440 @@
> > +/*
> > + * (C) Copyright 2001
> > + * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
> > + *
> > + * (C) Copyright 2001
> > + * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > + *
> > + * 2003 (c) MontaVista Software, Inc.
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#include <common.h>
> > +#include <linux/byteorder/swab.h>
> > +
> > +flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info 
> > for FLASH chips */
> > +
> > +/* Board support for 1 or 2 flash devices */
> > +#define FLASH_PORT_WIDTH32
> > +#undef FLASH_PORT_WIDTH16
> > +
> > +#ifdef FLASH_PORT_WIDTH16
> > +#define FLASH_PORT_WIDTH		ushort
> > +#define FLASH_PORT_WIDTHV		vu_short
> > +#define SWAP(x)				__swab16(x)
> > +#else
> > +#define FLASH_PORT_WIDTH		ulong
> > +#define FLASH_PORT_WIDTHV		vu_long
> > +#define SWAP(x)				__swab32(x)
> > +#endif
> > +
> > +#define FPW				FLASH_PORT_WIDTH
> > +#define FPWV				FLASH_PORT_WIDTHV
> > +
> > +#define mb() __asm__ __volatile__ ("" : : : "memory")
> > +
> > +/*-----------------------------------------------------------
> > ------------
> > + * Functions
> > + */
> > +static ulong flash_get_size(FPW * addr, flash_info_t * info);
> > +static int write_data(flash_info_t * info, ulong dest, FPW data);
> > +static void flash_get_offsets(ulong base, flash_info_t * info);
> > +void inline spin_wheel(void);
> > +
> > +/*-----------------------------------------------------------
> > ------------
> > + */
> > +
> > +unsigned long
> > +flash_init(void)
> > +{
> > +	int i;
> > +	ulong size = 0;
> > +
> > +	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
> > +		switch (i) {
> > +		case 0:
> > +			flash_get_size((FPW *) PHYS_FLASH_1, 
> > &flash_info[i]);
> > +			flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
> > +			break;
> > +		default:
> > +			panic("configured too many flash banks!\n");
> > +			break;
> > +		}
> > +		size += flash_info[i].size;
> > +	}
> > +
> > +	/* Protect monitor and environment sectors
> > +	 */
> > +	flash_protect(FLAG_PROTECT_SET,
> > +		      CFG_FLASH_BASE,
> > +		      CFG_FLASH_BASE + monitor_flash_len - 1, 
> > &flash_info[0]);
> > +
> > +	flash_protect(FLAG_PROTECT_SET,
> > +		      CFG_ENV_ADDR,
> > +		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
> > +
> > +	return size;
> > +}
> > +
> > +/*-----------------------------------------------------------
> > ------------
> > + */
> > +static void
> > +flash_get_offsets(ulong base, flash_info_t * info)
> > +{
> > +	int i;
> > +
> > +	if (info->flash_id == FLASH_UNKNOWN) {
> > +		return;
> > +	}
> > +
> > +	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
> > +		for (i = 0; i < info->sector_count; i++) {
> > +			info->start[i] = base + (i * 
> > PHYS_FLASH_SECT_SIZE);
> > +			info->protect[i] = 0;
> > +		}
> > +	}
> > +}
> > +
> > +/*-----------------------------------------------------------
> > ------------
> > + */
> > +void
> > +flash_print_info(flash_info_t * info)
> > +{
> > +	int i;
> > +
> > +	if (info->flash_id == FLASH_UNKNOWN) {
> > +		printf("missing or unknown FLASH type\n");
> > +		return;
> > +	}
> > +
> > +	switch (info->flash_id & FLASH_VENDMASK) {
> > +	case FLASH_MAN_INTEL:
> > +		printf("INTEL ");
> > +		break;
> > +	default:
> > +		printf("Unknown Vendor ");
> > +		break;
> > +	}
> > +
> > +	switch (info->flash_id & FLASH_TYPEMASK) {
> > +	case FLASH_28F128J3A:
> > +		printf("28F128J3A\n");
> > +		break;
> > +	case FLASH_28F640J5:
> > +		printf("28F640J5\n");
> > +		break;
> > +	default:
> > +		printf("Unknown Chip Type\n");
> > +		break;
> > +	}
> > +
> > +	printf("  Size: %ld MB in %d Sectors\n",
> > +	       info->size >> 20, info->sector_count);
> > +
> > +	printf("  Sector Start Addresses:");
> > +	for (i = 0; i < info->sector_count; ++i) {
> > +		if ((i % 5) == 0)
> > +			printf("\n   ");
> > +		printf(" %08lX%s",
> > +		       info->start[i], info->protect[i] ? " 
> > (RO)" : "     ");
> > +	}
> > +	printf("\n");
> > +	return;
> > +}
> > +
> > +/*
> > + * The following code cannot be run from FLASH!
> > + */
> > +static ulong
> > +flash_get_size(FPW * addr, flash_info_t * info)
> > +{
> > +	volatile FPW value;
> > +	/* Write auto select command: read Manufacturer ID */
> > +	addr[0x5555] = (FPW) 0x00AA00AA;
> > +	addr[0x2AAA] = (FPW) 0x00550055;
> > +	addr[0x5555] = (FPW) 0x00900090;
> > +
> > +	mb();
> > +	value = addr[0];
> > +
> > +	switch (value) {
> > +
> > +	case (FPW) INTEL_MANUFACT:
> > +		info->flash_id = FLASH_MAN_INTEL;
> > +		break;
> > +
> > +	default:
> > +		info->flash_id = FLASH_UNKNOWN;
> > +		info->sector_count = 0;
> > +		info->size = 0;
> > +		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
> > +		return (0);	/* no or unknown flash  */
> > +	}
> > +
> > +	mb();
> > +	value = addr[1];	/* device ID            */
> > +	switch (value) {
> > +	case (FPW) INTEL_ID_28F128J3A:
> > +		info->flash_id += FLASH_28F128J3A;
> > +		info->sector_count = 128;
> > +		info->size = 0x02000000;
> > +		break;		/* => 16 MB     */
> > +	case (FPW) INTEL_ID_28F640J5:
> > +		info->flash_id += FLASH_28F640J5;
> > +		info->sector_count = 64;
> > +		info->size = 0x01000000;
> > +		break;		/* => 16 MB     */
> > +
> > +	default:
> > +		info->flash_id = FLASH_UNKNOWN;
> > +		break;
> > +	}
> > +
> > +	if (info->sector_count > CFG_MAX_FLASH_SECT) {
> > +		printf("** ERROR: sector count %d > max (%d) **\n",
> > +		       info->sector_count, CFG_MAX_FLASH_SECT);
> > +		info->sector_count = CFG_MAX_FLASH_SECT;
> > +	}
> > +
> > +	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
> > +
> > +	return (info->size);
> > +}
> > +
> > +/*-----------------------------------------------------------
> > ------------
> > + */
> > +
> > +int
> > +flash_erase(flash_info_t * info, int s_first, int s_last)
> > +{
> > +	int flag, prot, sect;
> > +	ulong type, start, last;
> > +	int rcode = 0;
> > +
> > +	if ((s_first < 0) || (s_first > s_last)) {
> > +		if (info->flash_id == FLASH_UNKNOWN) {
> > +			printf("- missing\n");
> > +		} else {
> > +			printf("- no sectors to erase\n");
> > +		}
> > +		return 1;
> > +	}
> > +
> > +	type = (info->flash_id & FLASH_VENDMASK);
> > +	if ((type != FLASH_MAN_INTEL)) {
> > +		printf("Can't erase unknown flash type %08lx - 
> > aborted\n",
> > +		       info->flash_id);
> > +		return 1;
> > +	}
> > +
> > +	prot = 0;
> > +	for (sect = s_first; sect <= s_last; ++sect) {
> > +		if (info->protect[sect]) {
> > +			prot++;
> > +		}
> > +	}
> > +
> > +	if (prot) {
> > +		printf("- Warning: %d protected sectors will 
> > not be erased!\n",
> > +		       prot);
> > +	} else {
> > +		printf("\n");
> > +	}
> > +
> > +	start = get_timer(0);
> > +	last = start;
> > +
> > +	/* Disable interrupts which might cause a timeout here */
> > +	flag = disable_interrupts();
> > +
> > +	/* Start erase on unprotected sectors */
> > +	for (sect = s_first; sect <= s_last; sect++) {
> > +		if (info->protect[sect] == 0) {	/* not protected */
> > +			FPWV *addr = (FPWV *) (info->start[sect]);
> > +			FPW status;
> > +
> > +			printf("Erasing sector %2d ... ", sect);
> > +
> > +			/* arm simple, non interrupt dependent timer */
> > +			reset_timer_masked();
> > +
> > +			*addr = (FPW) 0x00500050;	/* 
> > clear status register */
> > +			*addr = (FPW) 0x00200020;	/* 
> > erase setup */
> > +			*addr = (FPW) 0x00D000D0;	/* 
> > erase confirm */
> > +
> > +			while (((status =
> > +				 *addr) & (FPW) 0x00800080) !=
> > +			       (FPW) 0x00800080) {
> > +				if (get_timer_masked() > 
> > CFG_FLASH_ERASE_TOUT) {
> > +					printf("Timeout\n");
> > +					*addr = (FPW) 
> > 0x00B000B0;	/* suspend erase         */
> > +					*addr = (FPW) 
> > 0x00FF00FF;	/* reset to read mode */
> > +					rcode = 1;
> > +					break;
> > +				}
> > +			}
> > +
> > +			*addr = (FPW) 0x00500050;	/* 
> > clear status register cmd.   */
> > +			*addr = (FPW) 0x00FF00FF;	/* 
> > resest to read mode          */
> > +
> > +			printf(" done\n");
> > +		}
> > +	}
> > +	return rcode;
> > +}
> > +
> > +/*-----------------------------------------------------------
> > ------------
> > + * Copy memory to flash, returns:
> > + * 0 - OK
> > + * 1 - write timeout
> > + * 2 - Flash not erased
> > + * 4 - Flash not identified
> > + */
> > +
> > +int
> > +write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
> > +{
> > +	ulong cp, wp;
> > +	FPW data;
> > +	int count, i, l, rc, port_width;
> > +
> > +	if (info->flash_id == FLASH_UNKNOWN) {
> > +		return 4;
> > +	}
> > +/* get lower word aligned address */
> > +#ifdef FLASH_PORT_WIDTH16
> > +	wp = (addr & ~1);
> > +	port_width = 2;
> > +#else
> > +	wp = (addr & ~3);
> > +	port_width = 4;
> > +#endif
> > +
> > +	/*
> > +	 * handle unaligned start bytes
> > +	 */
> > +	if ((l = addr - wp) != 0) {
> > +		data = 0;
> > +		for (i = 0, cp = wp; i < l; ++i, ++cp) {
> > +			data = (data << 8) | (*(uchar *) cp);
> > +		}
> > +		for (; i < port_width && cnt > 0; ++i) {
> > +			data = (data << 8) | *src++;
> > +			--cnt;
> > +			++cp;
> > +		}
> > +		for (; cnt == 0 && i < port_width; ++i, ++cp) {
> > +			data = (data << 8) | (*(uchar *) cp);
> > +		}
> > +
> > +		if ((rc = write_data(info, wp, SWAP(data))) != 0) {
> > +			return (rc);
> > +		}
> > +		wp += port_width;
> > +	}
> > +
> > +	/*
> > +	 * handle word aligned part
> > +	 */
> > +	count = 0;
> > +	while (cnt >= port_width) {
> > +		data = 0;
> > +		for (i = 0; i < port_width; ++i) {
> > +			data = (data << 8) | *src++;
> > +		}
> > +		if ((rc = write_data(info, wp, SWAP(data))) != 0) {
> > +			return (rc);
> > +		}
> > +		wp += port_width;
> > +		cnt -= port_width;
> > +		if (count++ > 0x800) {
> > +			spin_wheel();
> > +			count = 0;
> > +		}
> > +	}
> > +
> > +	if (cnt == 0) {
> > +		return (0);
> > +	}
> > +
> > +	/*
> > +	 * handle unaligned tail bytes
> > +	 */
> > +	data = 0;
> > +	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
> > +		data = (data << 8) | *src++;
> > +		--cnt;
> > +	}
> > +	for (; i < port_width; ++i, ++cp) {
> > +		data = (data << 8) | (*(uchar *) cp);
> > +	}
> > +
> > +	return (write_data(info, wp, SWAP(data)));
> > +}
> > +
> > +/*-----------------------------------------------------------
> > ------------
> > + * Write a word or halfword to Flash, returns:
> > + * 0 - OK
> > + * 1 - write timeout
> > + * 2 - Flash not erased
> > + */
> > +static int
> > +write_data(flash_info_t * info, ulong dest, FPW data)
> > +{
> > +	FPWV *addr = (FPWV *) dest;
> > +	ulong status;
> > +	int flag;
> > +
> > +	/* Check if Flash is (sufficiently) erased */
> > +	if ((*addr & data) != data) {
> > +		printf("not erased at %08lx (%x)\n", (ulong) 
> > addr, *addr);
> > +		return (2);
> > +	}
> > +	/* Disable interrupts which might cause a timeout here */
> > +	flag = disable_interrupts();
> > +
> > +	*addr = (FPW) 0x00400040;	/* write setup */
> > +	*addr = data;
> > +
> > +	/* arm simple, non interrupt dependent timer */
> > +	reset_timer_masked();
> > +
> > +	/* wait while polling the status register */
> > +	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 
> > 0x00800080) {
> > +		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
> > +			*addr = (FPW) 0x00FF00FF;	/* 
> > restore read mode */
> > +			return (1);
> > +		}
> > +	}
> > +
> > +	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
> > +
> > +	return (0);
> > +}
> > +
> > +void inline
> > +spin_wheel(void)
> > +{
> > +	static int p = 0;
> > +	static char w[] = "\\/-";
> > +
> > +	printf("\010%c", w[p]);
> > +	(++p == 3) ? (p = 0) : 0;
> > +}
> > diff -x CVS -ruN u-boot.orig/board/gcplus/gcplus.c 
> > u-boot.new/board/gcplus/gcplus.c
> > --- u-boot.orig/board/gcplus/gcplus.c	1969-12-31 
> > 19:00:00.000000000 -0500
> > +++ u-boot.new/board/gcplus/gcplus.c	2004-03-09 
> > 21:52:57.000000000 -0500
> > @@ -0,0 +1,73 @@
> > +/*
> > + * (C) Copyright 2002
> > + * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> > + * Marius Groeger <mgroeger at sysgo.de>
> > + *
> > + * 2003-2004 (c) MontaVista Software, Inc.
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#include <common.h>
> > +#include <SA-1100.h>
> > +/* 
> > --------------------------------------------------------------
> > ----------- */
> > +
> > +/*
> > + * Miscelaneous platform dependent initialisations
> > + */
> > +
> > +int
> > +board_init(void)
> > +{
> > +	DECLARE_GLOBAL_DATA_PTR;
> > +
> > +	gd->bd->bi_arch_number = 29;	/* ADS 
> > GraphicsClientPlus Board */
> > +
> > +	gd->bd->bi_boot_params = 0xc000003c; /* Weird address? */
> > +
> > +	/* Most of the ADS GCPlus I/O is connected to Static nCS2.
> > +	 * So I'm brute forcing nCS2 timiming here for worst case.
> > +	 */
> > +	MSC1 &= ~0xFFFF;
> > +	MSC1 |= 0x8649;
> > +
> > +	/* Nothing is connected to Static nCS4 or nCS5. But I'm using
> > +	 * nCS4 as a paranoia safe guard to force nCS2, nOE; nWE high
> > +	 * after accessing I/O via (non-VLIO) nCS2. What can I say, I'm
> > +	 * paranoid and lack decent tools to alleviate my fear. I sure
> > +	 * do wish I had a logic analyzer. : (
> > +	 */
> > +
> > +	MSC2 =  0xfff9fff9;
> > +
> > +	return 0;
> > +}
> > +
> > +int
> > +dram_init(void)
> > +{
> > +	DECLARE_GLOBAL_DATA_PTR;
> > +
> > +	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> > +	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> > +	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
> > +	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
> > +
> > +	return (0);
> > +}
> > diff -x CVS -ruN u-boot.orig/board/gcplus/Makefile 
> > u-boot.new/board/gcplus/Makefile
> > --- u-boot.orig/board/gcplus/Makefile	1969-12-31 
> > 19:00:00.000000000 -0500
> > +++ u-boot.new/board/gcplus/Makefile	2004-03-09 
> > 21:50:31.000000000 -0500
> > @@ -0,0 +1,49 @@
> > +#
> > +# (C) Copyright 2000
> > +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > +#
> > +# 2003 (c) MontaVista Software, Inc.
> > +#
> > +# See file CREDITS for list of people who contributed to this
> > +# project.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation; either version 2 of
> > +# the License, or (at your option) any later version.
> > +#
> > +# This program is distributed in the hope that it will be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write to the Free Software
> > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > +# MA 02111-1307 USA
> > +#
> > +
> > +include $(TOPDIR)/config.mk
> > +
> > +LIB	= lib$(BOARD).a
> > +
> > +OBJS	:= gcplus.o flash.o
> > +SOBJS	:= memsetup.o
> > +
> > +$(LIB):	$(OBJS) $(SOBJS)
> > +	$(AR) crv $@ $(OBJS) $(SOBJS)
> > +
> > +clean:
> > +	rm -f $(SOBJS) $(OBJS)
> > +
> > +distclean:	clean
> > +	rm -f $(LIB) core *.bak .depend
> > +
> > +#############################################################
> > ############
> > +
> > +.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
> > +		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
> > +
> > +-include .depend
> > +
> > +#############################################################
> > ############
> > diff -x CVS -ruN u-boot.orig/board/gcplus/memsetup.S 
> > u-boot.new/board/gcplus/memsetup.S
> > --- u-boot.orig/board/gcplus/memsetup.S	1969-12-31 
> > 19:00:00.000000000 -0500
> > +++ u-boot.new/board/gcplus/memsetup.S	2004-03-09 
> > 23:12:53.000000000 -0500
> > @@ -0,0 +1,77 @@
> > +/*
> > + * Memory Setup stuff - taken from blob memsetup.S
> > + *
> > + * Copyright (C) 1999 2000 2001 Erik Mouw 
> > (J.A.K.Mouw at its.tudelft.nl) and
> > + *                     Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
> > + * 2003-2004 (c) MontaVista Software, Inc.
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +
> > +#include "config.h"
> > +#include "version.h"
> > +
> > +
> > +	.globl	memsetup
> > +memsetup:
> > +	/* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory 
> > init for us.
> > +	 * However the darn thing leaves the MMU enabled before 
> > handing control
> > +	 * over to us. So we need to disable the MMU and we use memsetup
> > +	 * to do it.
> > +	 */
> > +
> > +@ The following code segment was borrowed with gratitude from:
> > +@	linux-2.4.19-rmk7/arch/arm/boot/compressed/head-sa1100.S
> > +
> > +	@ Data cache might be active.
> > +	@ Be sure to flush kernel binary out of the cache,
> > +	@ whatever state it is, before it is turned off.
> > +	@ This is done by fetching through currently executed
> > +	@ memory to be sure we hit the same cache.
> > +	bic	r2, pc, #0x1f
> > +	add	r3, r2, #0x4000		@ 16 kb is quite enough...
> > +1:	ldr	r0, [r2], #32
> > +	teq	r2, r3
> > +	bne	1b
> > +	mcr	p15, 0, r0, c7, c10, 4	@ drain WB
> > +	mcr	p15, 0, r0, c7, c7, 0	@ flush I & D caches
> > +
> > +	@ disabling MMU and caches
> > +	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
> > +	bic	r0, r0, #0x0d		@ clear WB, DC, MMU
> > +	bic	r0, r0, #0x1000		@ clear Icache
> > +	mcr	p15, 0, r0, c1, c0, 0
> > +
> > +	nop
> > +	nop
> > +	nop
> > +	nop
> > +	nop
> > +
> > +	b	2f
> > +2:
> > +	nop
> > +	nop
> > +	nop
> > +	nop
> > +	nop
> > +
> > +
> > +	mov	pc, lr
> > diff -x CVS -ruN u-boot.orig/board/gcplus/u-boot.lds 
> > u-boot.new/board/gcplus/u-boot.lds
> > --- u-boot.orig/board/gcplus/u-boot.lds	1969-12-31 
> > 19:00:00.000000000 -0500
> > +++ u-boot.new/board/gcplus/u-boot.lds	2004-03-06 
> > 16:03:44.000000000 -0500
> > @@ -0,0 +1,57 @@
> > +/*
> > + * (C) Copyright 2000
> > + * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > + * 2003 (c) MontaVista Software, Inc.
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", 
> > "elf32-littlearm")
> > +OUTPUT_ARCH(arm)
> > +ENTRY(_start)
> > +SECTIONS
> > +{
> > +	. = 0x00000000;
> > +
> > +	. = ALIGN(4);
> > +	.text      :
> > +	{
> > +		cpu/sa1100/start.o	(.text)
> > +		*(.text)
> > +	}
> > +
> > +	. = ALIGN(4);
> > +	.rodata : { *(.rodata) }
> > +
> > +	. = ALIGN(4);
> > +	.data : { *(.data) }
> > +
> > +	. = ALIGN(4);
> > +	.got : { *(.got) }
> > +
> > +
> > +	__u_boot_cmd_start = .;
> > +	.u_boot_cmd : { *(.u_boot_cmd) }
> > +	__u_boot_cmd_end = .;
> > +
> > +	. = ALIGN(4);
> > +	__bss_start = .;
> > +	.bss : { *(.bss) }
> > +	_end = .;
> > +}
> > diff -x CVS -ruN u-boot.orig/include/configs/gcplus.h 
> > u-boot.new/include/configs/gcplus.h
> > --- u-boot.orig/include/configs/gcplus.h	1969-12-31 
> > 19:00:00.000000000 -0500
> > +++ u-boot.new/include/configs/gcplus.h	2004-03-11 
> > 09:41:31.000000000 -0500
> > @@ -0,0 +1,174 @@
> > +/*
> > + * (C) Copyright 2002
> > + * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> > + * Marius Groeger <mgroeger at sysgo.de>
> > + *
> > + * 2003-2004 (c) MontaVista Software, Inc.
> > + *
> > + * Configuation settings for the ADS GraphicsClient+ board.
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#ifndef __CONFIG_H
> > +#define __CONFIG_H
> > +
> > +#undef	 DEBUG
> > +
> > +/*
> > + * The ADS GCPlus Linux boot ROM loads U-Boot into RAM at 0xc0200000.
> > + * We don't actually init RAM in this case since we're using 
> > U-Boot as
> > + * an secondary boot loader during Linux kernel development 
> > and testing,
> > + * e.g. bootp/tftp download of the kernel is a far more convenient
> > + * when testing new kernels on this target. However the ADS 
> > GCPlus Linux
> > + * boot ROM leaves the MMU enabled when it passes control to 
> > U-Boot. So
> > + * we use memsetup (CONFIG_INIT_CRITICAL) to remedy that problem.
> > + */
> > +#define CONFIG_INIT_CRITICAL
> > +
> > +/*
> > + * High Level Configuration Options
> > + * (easy to change)
> > + */
> > +#define CONFIG_SA1110		1	/* This is an 
> > SA1100 CPU	*/
> > +#define CONFIG_GCPLUS		1	/* on an ADS 
> > GCPlus Board      */
> > +
> > +#undef CONFIG_USE_IRQ			/* we don't 
> > need IRQ/FIQ stuff */
> > +
> > +#define CONFIG_CMDLINE_TAG	 1	/* enable passing of 
> > ATAGs	*/
> > +#define CONFIG_SETUP_MEMORY_TAGS 1
> > +#define CONFIG_INITRD_TAG	 1
> > +
> > +/*
> > + * Size of malloc() pool
> > + */
> > +#define CFG_MALLOC_LEN          (CFG_ENV_SIZE + 128*1024)
> > +#define CFG_GBL_DATA_SIZE       128     /* size rsrvd for 
> > initial data */
> > +
> > +
> > +/*
> > + * Hardware drivers
> > + */
> > +#define CONFIG_DRIVER_LAN91C96	/* we have an SMC9194 
> > on-board */
> > +#define CONFIG_LAN91C96_BASE	0x100e0000
> > +
> > +/*
> > + * select serial console configuration
> > + */
> > +#define CONFIG_SERIAL3          1	/* we use SERIAL 3 on 
> > ADS GCPlus */
> > +
> > +/* allow to overwrite serial and ethaddr */
> > +#define CONFIG_ENV_OVERWRITE
> > +
> > +#define CONFIG_BAUDRATE		38400
> > +
> > +#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | CFG_CMD_DHCP)
> > +#define CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
> > +
> > +/* this must be included AFTER the definition of 
> > CONFIG_COMMANDS (if any) */
> > +#include <cmd_confdefs.h>
> > +
> > +#define CONFIG_BOOTDELAY	3
> > +#define CONFIG_BOOTARGS		"console=ttySA0,38400n8 
> > mtdparts=sa1100-flash:1m at 0(zImage),3m at 1m(ramdisk.gz),12m at 4m(us
> > erfs) root=/dev/nfs ip=bootp"
> > +#define CONFIG_BOOTCOMMAND	"bootp;tftp;bootm"
> > +#define CFG_AUTOLOAD            "n"             /* No autoload */
> > +
> > +#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
> > +#define CONFIG_KGDB_BAUDRATE	38400		/* speed to run 
> > kgdb serial port */
> > +#define CONFIG_KGDB_SER_INDEX	2		/* 
> > which serial port to use */
> > +#endif
> > +
> > +/*
> > + * Miscellaneous configurable options
> > + */
> > +#define	CFG_LONGHELP				/* 
> > undef to save memory		*/
> > +#define	CFG_PROMPT		"ADS GCPlus # "	/* 
> > Monitor Command Prompt	*/
> > +#define	CFG_CBSIZE		256		/* 
> > Console I/O Buffer Size	*/
> > +#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) 
> > /* Print Buffer Size */
> > +#define	CFG_MAXARGS		16		/* max 
> > number of command args	*/
> > +#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot 
> > Argument Buffer Size	*/
> > +
> > +#define CFG_MEMTEST_START	0xc0400000	/* memtest 
> > works on	*/
> > +#define CFG_MEMTEST_END		0xc0800000	/* 4 
> > ... 8 MB in DRAM	*/
> > +
> > +#undef  CFG_CLKS_IN_HZ		/* everything, incl 
> > board info, in Hz */
> > +
> > +#define	CFG_LOAD_ADDR		0xc0000000	/* 
> > default load address	*/
> > +
> > +#define	CFG_HZ			3686400		/* 
> > incrementer freq: 3.6864 MHz */
> > +#define CFG_CPUSPEED		0x0a		/* set core 
> > clock to 206MHz */
> > +
> > +						/* valid baudrates */
> > +#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
> > +
> > +/*-----------------------------------------------------------
> > ------------
> > + * Stack sizes
> > + *
> > + * The stack sizes are set up in start.S using the settings below
> > + */
> > +#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
> > +#ifdef CONFIG_USE_IRQ
> > +#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
> > +#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
> > +#endif
> > +
> > +/*-----------------------------------------------------------
> > ------------
> > + * Physical Memory Map
> > + */
> > +#define CONFIG_NR_DRAM_BANKS	2	   /* we have 2 banks of DRAM */
> > +#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
> > +#define PHYS_SDRAM_1_SIZE	0x01000000 /* 16 MB */
> > +#define PHYS_SDRAM_2		0xc8000000 /* SDRAM Bank #2 */
> > +#define PHYS_SDRAM_2_SIZE	0x01000000 /* 16 MB */
> > +
> > +
> > +#define PHYS_FLASH_1		0x08000000 /* Flash Bank #1 */
> > +#define PHYS_FLASH_SIZE		0x00800000 /* 8 MB */
> > +#define PHYS_FLASH_BANK_SIZE    0x01000000 /* 16 MB Banks */
> > +#define PHYS_FLASH_SECT_SIZE    0x00040000 /* 256 KB sectors (x2) */
> > +
> > +#define CFG_FLASH_BASE		PHYS_FLASH_1
> > +
> > +/*-----------------------------------------------------------
> > ------------
> > + * FLASH and environment organization
> > + */
> > +#if	1
> > +#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
> > +#define CFG_MAX_FLASH_SECT	128	/* max number of 
> > sectors on one chip */
> > +
> > +/* timeout values are in ticks */
> > +#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
> > +#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
> > +#else
> > +/* REVISIT: This doesn't work on ADS GCPlus just yet:
> > +#define CFG_FLASH_CFI           1       /* flash is CFI 
> > conformant      */
> > +#define CFG_FLASH_CFI_DRIVER    1       /* use common cfi 
> > driver        */
> > +#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered 
> > writes (20x faster) */
> > +#define CFG_MAX_FLASH_BANKS     1       /* max # of memory 
> > banks        */
> > +#define CFG_FLASH_INCREMENT     0       /* there is only one 
> > bank       */
> > +#define CFG_MAX_FLASH_SECT      128     /* max # of sectors 
> > on one chip */
> > +//#define CFG_FLASH_PROTECTION    1       /* hardware flash 
> > protection    */
> > +#define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE }
> > +#endif
> > +
> > +#define	CFG_ENV_IS_IN_FLASH	1
> > +#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 
> > PHYS_FLASH_SECT_SIZE)	/* Addr of Environment Sector	*/
> > +#define CFG_ENV_SIZE		PHYS_FLASH_SECT_SIZE
> > +
> > +#endif	/* __CONFIG_H */
> > diff -x CVS -ruN u-boot.orig/Makefile u-boot.new/Makefile
> > --- u-boot.orig/Makefile	2004-03-11 14:00:20.000000000 -0500
> > +++ u-boot.new/Makefile	2004-03-09 23:16:52.000000000 -0500
> > @@ -912,6 +912,9 @@
> >  shannon_config	:	unconfig
> >  	@./mkconfig $(@:_config=) arm sa1100 shannon
> >  
> > +gcplus_config	:	unconfig
> > +	@./mkconfig $(@:_config=) arm sa1100 gcplus
> > +
> >  
> > ##############################################################
> > ###########
> >  ## ARM92xT Systems
> >  
> > ##############################################################
> > ###########
> > 
> > 
> > -------------------------------------------------------
> > This SF.Net email is sponsored by: IBM Linux Tutorials
> > Free Linux tutorial presented by Daniel Robbins, President and CEO of
> > GenToo technologies. Learn everything from fundamentals to system
> > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> > _______________________________________________
> > U-Boot-Users mailing list
> > U-Boot-Users at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/u-boot-users
> > 




More information about the U-Boot mailing list