[U-Boot-Users] [PATCH] New ADS GraphicsClient+ board port
Matthew S. McClintock
mattsm at arlut.utexas.edu
Fri Mar 12 01:00:52 CET 2004
On Thu, 2004-03-11 at 14:28, George G. Davis wrote:
> On Thu, Mar 11, 2004 at 02:56:24PM -0500, Brad Kemp wrote:
> > George,
> > What problem did you have with the CFI flash driver?
>
> Couldn't detect flash. I didn't try to debug it much beyond that since
> I already had the flash.c ported from a few months ago. So I punted
> with that for now. I took a look at that common CFI flash driver and
> had the opinion that the BE/LE support could/should probably be done
> better, e.g. via appropriate use of cpu_to_{le,be{8,16,32,64}
> macros. But that was just an opinion drawn from a mere glance at
> the source.
>
I think it should be configurable period. I am using the CFI driver on
a BE system but I have the LE option defined since my flash is byte
swapped. So that works for me, but I have to override the _LITTLE_ENDIAN
define in just that file. So I think it should somehow look for a
different define to override how it works. IE something like
CONFIG_FLASH_CFI_BYTE_SWAP or something. Comments?
Thanks,
Matthew
> --
> Regards,
> George
>
>
> > Brad
> >
> > > -----Original Message-----
> > > From: George G. Davis [mailto:davis_g at comcast.net]
> > > Sent: Thursday, March 11, 2004 2:17 PM
> > > To: u-boot-users at lists.sourceforge.net
> > > Subject: [U-Boot-Users] [PATCH] New ADS GraphicsClient+ board port
> > >
> > >
> > > Greetings,
> > >
> > > I humbly submit this trivial board port for the ADS
> > > GraphicsClient+. This
> > > SA-1110 based board is actually EOL but it's still useful to
> > > me for Linux
> > > development/testing. I'll eventually make this thing use the
> > > common CFI
> > > flash support instead of the flash.c included here. But for now I was
> > > unable to get the CFI flash support working on this target.
> > >
> > > This patch is based on latest CVS HEAD +/- a few hours.
> > >
> > > Thanks!
> > >
> > > --
> > > Regards,
> > > George
> > >
> > >
> > > diff -x CVS -ruN u-boot.orig/board/gcplus/config.mk
> > > u-boot.new/board/gcplus/config.mk
> > > --- u-boot.orig/board/gcplus/config.mk 1969-12-31
> > > 19:00:00.000000000 -0500
> > > +++ u-boot.new/board/gcplus/config.mk 2003-11-06
> > > 00:36:23.000000000 -0500
> > > @@ -0,0 +1,13 @@
> > > +#
> > > +# ADS GCPlus board with SA1110 cpu
> > > +#
> > > +# The ADS GCPlus has 2 banks of 16 MiB SDRAM
> > > +#
> > > +# We use the ADS GCPlus Linux boot ROM to load U-Boot into SDRAM
> > > +# at c020'0000 and then move ourself to c8f0'0000. Basically, just
> > > +# install the U-Boot binary as you would the Linux zImage and then
> > > +# reap the benfits of more convenient Linux development cycles, i.e.
> > > +# bootp;tftp;bootm, repeat, etc.,.
> > > +#
> > > +
> > > +TEXT_BASE = 0xc8f00000
> > > diff -x CVS -ruN u-boot.orig/board/gcplus/flash.c
> > > u-boot.new/board/gcplus/flash.c
> > > --- u-boot.orig/board/gcplus/flash.c 1969-12-31
> > > 19:00:00.000000000 -0500
> > > +++ u-boot.new/board/gcplus/flash.c 2003-12-09
> > > 11:29:34.000000000 -0500
> > > @@ -0,0 +1,440 @@
> > > +/*
> > > + * (C) Copyright 2001
> > > + * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
> > > + *
> > > + * (C) Copyright 2001
> > > + * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > > + *
> > > + * 2003 (c) MontaVista Software, Inc.
> > > + *
> > > + * See file CREDITS for list of people who contributed to this
> > > + * project.
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License as
> > > + * published by the Free Software Foundation; either version 2 of
> > > + * the License, or (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public License
> > > + * along with this program; if not, write to the Free Software
> > > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > > + * MA 02111-1307 USA
> > > + */
> > > +
> > > +#include <common.h>
> > > +#include <linux/byteorder/swab.h>
> > > +
> > > +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info
> > > for FLASH chips */
> > > +
> > > +/* Board support for 1 or 2 flash devices */
> > > +#define FLASH_PORT_WIDTH32
> > > +#undef FLASH_PORT_WIDTH16
> > > +
> > > +#ifdef FLASH_PORT_WIDTH16
> > > +#define FLASH_PORT_WIDTH ushort
> > > +#define FLASH_PORT_WIDTHV vu_short
> > > +#define SWAP(x) __swab16(x)
> > > +#else
> > > +#define FLASH_PORT_WIDTH ulong
> > > +#define FLASH_PORT_WIDTHV vu_long
> > > +#define SWAP(x) __swab32(x)
> > > +#endif
> > > +
> > > +#define FPW FLASH_PORT_WIDTH
> > > +#define FPWV FLASH_PORT_WIDTHV
> > > +
> > > +#define mb() __asm__ __volatile__ ("" : : : "memory")
> > > +
> > > +/*-----------------------------------------------------------
> > > ------------
> > > + * Functions
> > > + */
> > > +static ulong flash_get_size(FPW * addr, flash_info_t * info);
> > > +static int write_data(flash_info_t * info, ulong dest, FPW data);
> > > +static void flash_get_offsets(ulong base, flash_info_t * info);
> > > +void inline spin_wheel(void);
> > > +
> > > +/*-----------------------------------------------------------
> > > ------------
> > > + */
> > > +
> > > +unsigned long
> > > +flash_init(void)
> > > +{
> > > + int i;
> > > + ulong size = 0;
> > > +
> > > + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
> > > + switch (i) {
> > > + case 0:
> > > + flash_get_size((FPW *) PHYS_FLASH_1,
> > > &flash_info[i]);
> > > + flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
> > > + break;
> > > + default:
> > > + panic("configured too many flash banks!\n");
> > > + break;
> > > + }
> > > + size += flash_info[i].size;
> > > + }
> > > +
> > > + /* Protect monitor and environment sectors
> > > + */
> > > + flash_protect(FLAG_PROTECT_SET,
> > > + CFG_FLASH_BASE,
> > > + CFG_FLASH_BASE + monitor_flash_len - 1,
> > > &flash_info[0]);
> > > +
> > > + flash_protect(FLAG_PROTECT_SET,
> > > + CFG_ENV_ADDR,
> > > + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
> > > +
> > > + return size;
> > > +}
> > > +
> > > +/*-----------------------------------------------------------
> > > ------------
> > > + */
> > > +static void
> > > +flash_get_offsets(ulong base, flash_info_t * info)
> > > +{
> > > + int i;
> > > +
> > > + if (info->flash_id == FLASH_UNKNOWN) {
> > > + return;
> > > + }
> > > +
> > > + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
> > > + for (i = 0; i < info->sector_count; i++) {
> > > + info->start[i] = base + (i *
> > > PHYS_FLASH_SECT_SIZE);
> > > + info->protect[i] = 0;
> > > + }
> > > + }
> > > +}
> > > +
> > > +/*-----------------------------------------------------------
> > > ------------
> > > + */
> > > +void
> > > +flash_print_info(flash_info_t * info)
> > > +{
> > > + int i;
> > > +
> > > + if (info->flash_id == FLASH_UNKNOWN) {
> > > + printf("missing or unknown FLASH type\n");
> > > + return;
> > > + }
> > > +
> > > + switch (info->flash_id & FLASH_VENDMASK) {
> > > + case FLASH_MAN_INTEL:
> > > + printf("INTEL ");
> > > + break;
> > > + default:
> > > + printf("Unknown Vendor ");
> > > + break;
> > > + }
> > > +
> > > + switch (info->flash_id & FLASH_TYPEMASK) {
> > > + case FLASH_28F128J3A:
> > > + printf("28F128J3A\n");
> > > + break;
> > > + case FLASH_28F640J5:
> > > + printf("28F640J5\n");
> > > + break;
> > > + default:
> > > + printf("Unknown Chip Type\n");
> > > + break;
> > > + }
> > > +
> > > + printf(" Size: %ld MB in %d Sectors\n",
> > > + info->size >> 20, info->sector_count);
> > > +
> > > + printf(" Sector Start Addresses:");
> > > + for (i = 0; i < info->sector_count; ++i) {
> > > + if ((i % 5) == 0)
> > > + printf("\n ");
> > > + printf(" %08lX%s",
> > > + info->start[i], info->protect[i] ? "
> > > (RO)" : " ");
> > > + }
> > > + printf("\n");
> > > + return;
> > > +}
> > > +
> > > +/*
> > > + * The following code cannot be run from FLASH!
> > > + */
> > > +static ulong
> > > +flash_get_size(FPW * addr, flash_info_t * info)
> > > +{
> > > + volatile FPW value;
> > > + /* Write auto select command: read Manufacturer ID */
> > > + addr[0x5555] = (FPW) 0x00AA00AA;
> > > + addr[0x2AAA] = (FPW) 0x00550055;
> > > + addr[0x5555] = (FPW) 0x00900090;
> > > +
> > > + mb();
> > > + value = addr[0];
> > > +
> > > + switch (value) {
> > > +
> > > + case (FPW) INTEL_MANUFACT:
> > > + info->flash_id = FLASH_MAN_INTEL;
> > > + break;
> > > +
> > > + default:
> > > + info->flash_id = FLASH_UNKNOWN;
> > > + info->sector_count = 0;
> > > + info->size = 0;
> > > + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
> > > + return (0); /* no or unknown flash */
> > > + }
> > > +
> > > + mb();
> > > + value = addr[1]; /* device ID */
> > > + switch (value) {
> > > + case (FPW) INTEL_ID_28F128J3A:
> > > + info->flash_id += FLASH_28F128J3A;
> > > + info->sector_count = 128;
> > > + info->size = 0x02000000;
> > > + break; /* => 16 MB */
> > > + case (FPW) INTEL_ID_28F640J5:
> > > + info->flash_id += FLASH_28F640J5;
> > > + info->sector_count = 64;
> > > + info->size = 0x01000000;
> > > + break; /* => 16 MB */
> > > +
> > > + default:
> > > + info->flash_id = FLASH_UNKNOWN;
> > > + break;
> > > + }
> > > +
> > > + if (info->sector_count > CFG_MAX_FLASH_SECT) {
> > > + printf("** ERROR: sector count %d > max (%d) **\n",
> > > + info->sector_count, CFG_MAX_FLASH_SECT);
> > > + info->sector_count = CFG_MAX_FLASH_SECT;
> > > + }
> > > +
> > > + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
> > > +
> > > + return (info->size);
> > > +}
> > > +
> > > +/*-----------------------------------------------------------
> > > ------------
> > > + */
> > > +
> > > +int
> > > +flash_erase(flash_info_t * info, int s_first, int s_last)
> > > +{
> > > + int flag, prot, sect;
> > > + ulong type, start, last;
> > > + int rcode = 0;
> > > +
> > > + if ((s_first < 0) || (s_first > s_last)) {
> > > + if (info->flash_id == FLASH_UNKNOWN) {
> > > + printf("- missing\n");
> > > + } else {
> > > + printf("- no sectors to erase\n");
> > > + }
> > > + return 1;
> > > + }
> > > +
> > > + type = (info->flash_id & FLASH_VENDMASK);
> > > + if ((type != FLASH_MAN_INTEL)) {
> > > + printf("Can't erase unknown flash type %08lx -
> > > aborted\n",
> > > + info->flash_id);
> > > + return 1;
> > > + }
> > > +
> > > + prot = 0;
> > > + for (sect = s_first; sect <= s_last; ++sect) {
> > > + if (info->protect[sect]) {
> > > + prot++;
> > > + }
> > > + }
> > > +
> > > + if (prot) {
> > > + printf("- Warning: %d protected sectors will
> > > not be erased!\n",
> > > + prot);
> > > + } else {
> > > + printf("\n");
> > > + }
> > > +
> > > + start = get_timer(0);
> > > + last = start;
> > > +
> > > + /* Disable interrupts which might cause a timeout here */
> > > + flag = disable_interrupts();
> > > +
> > > + /* Start erase on unprotected sectors */
> > > + for (sect = s_first; sect <= s_last; sect++) {
> > > + if (info->protect[sect] == 0) { /* not protected */
> > > + FPWV *addr = (FPWV *) (info->start[sect]);
> > > + FPW status;
> > > +
> > > + printf("Erasing sector %2d ... ", sect);
> > > +
> > > + /* arm simple, non interrupt dependent timer */
> > > + reset_timer_masked();
> > > +
> > > + *addr = (FPW) 0x00500050; /*
> > > clear status register */
> > > + *addr = (FPW) 0x00200020; /*
> > > erase setup */
> > > + *addr = (FPW) 0x00D000D0; /*
> > > erase confirm */
> > > +
> > > + while (((status =
> > > + *addr) & (FPW) 0x00800080) !=
> > > + (FPW) 0x00800080) {
> > > + if (get_timer_masked() >
> > > CFG_FLASH_ERASE_TOUT) {
> > > + printf("Timeout\n");
> > > + *addr = (FPW)
> > > 0x00B000B0; /* suspend erase */
> > > + *addr = (FPW)
> > > 0x00FF00FF; /* reset to read mode */
> > > + rcode = 1;
> > > + break;
> > > + }
> > > + }
> > > +
> > > + *addr = (FPW) 0x00500050; /*
> > > clear status register cmd. */
> > > + *addr = (FPW) 0x00FF00FF; /*
> > > resest to read mode */
> > > +
> > > + printf(" done\n");
> > > + }
> > > + }
> > > + return rcode;
> > > +}
> > > +
> > > +/*-----------------------------------------------------------
> > > ------------
> > > + * Copy memory to flash, returns:
> > > + * 0 - OK
> > > + * 1 - write timeout
> > > + * 2 - Flash not erased
> > > + * 4 - Flash not identified
> > > + */
> > > +
> > > +int
> > > +write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
> > > +{
> > > + ulong cp, wp;
> > > + FPW data;
> > > + int count, i, l, rc, port_width;
> > > +
> > > + if (info->flash_id == FLASH_UNKNOWN) {
> > > + return 4;
> > > + }
> > > +/* get lower word aligned address */
> > > +#ifdef FLASH_PORT_WIDTH16
> > > + wp = (addr & ~1);
> > > + port_width = 2;
> > > +#else
> > > + wp = (addr & ~3);
> > > + port_width = 4;
> > > +#endif
> > > +
> > > + /*
> > > + * handle unaligned start bytes
> > > + */
> > > + if ((l = addr - wp) != 0) {
> > > + data = 0;
> > > + for (i = 0, cp = wp; i < l; ++i, ++cp) {
> > > + data = (data << 8) | (*(uchar *) cp);
> > > + }
> > > + for (; i < port_width && cnt > 0; ++i) {
> > > + data = (data << 8) | *src++;
> > > + --cnt;
> > > + ++cp;
> > > + }
> > > + for (; cnt == 0 && i < port_width; ++i, ++cp) {
> > > + data = (data << 8) | (*(uchar *) cp);
> > > + }
> > > +
> > > + if ((rc = write_data(info, wp, SWAP(data))) != 0) {
> > > + return (rc);
> > > + }
> > > + wp += port_width;
> > > + }
> > > +
> > > + /*
> > > + * handle word aligned part
> > > + */
> > > + count = 0;
> > > + while (cnt >= port_width) {
> > > + data = 0;
> > > + for (i = 0; i < port_width; ++i) {
> > > + data = (data << 8) | *src++;
> > > + }
> > > + if ((rc = write_data(info, wp, SWAP(data))) != 0) {
> > > + return (rc);
> > > + }
> > > + wp += port_width;
> > > + cnt -= port_width;
> > > + if (count++ > 0x800) {
> > > + spin_wheel();
> > > + count = 0;
> > > + }
> > > + }
> > > +
> > > + if (cnt == 0) {
> > > + return (0);
> > > + }
> > > +
> > > + /*
> > > + * handle unaligned tail bytes
> > > + */
> > > + data = 0;
> > > + for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
> > > + data = (data << 8) | *src++;
> > > + --cnt;
> > > + }
> > > + for (; i < port_width; ++i, ++cp) {
> > > + data = (data << 8) | (*(uchar *) cp);
> > > + }
> > > +
> > > + return (write_data(info, wp, SWAP(data)));
> > > +}
> > > +
> > > +/*-----------------------------------------------------------
> > > ------------
> > > + * Write a word or halfword to Flash, returns:
> > > + * 0 - OK
> > > + * 1 - write timeout
> > > + * 2 - Flash not erased
> > > + */
> > > +static int
> > > +write_data(flash_info_t * info, ulong dest, FPW data)
> > > +{
> > > + FPWV *addr = (FPWV *) dest;
> > > + ulong status;
> > > + int flag;
> > > +
> > > + /* Check if Flash is (sufficiently) erased */
> > > + if ((*addr & data) != data) {
> > > + printf("not erased at %08lx (%x)\n", (ulong)
> > > addr, *addr);
> > > + return (2);
> > > + }
> > > + /* Disable interrupts which might cause a timeout here */
> > > + flag = disable_interrupts();
> > > +
> > > + *addr = (FPW) 0x00400040; /* write setup */
> > > + *addr = data;
> > > +
> > > + /* arm simple, non interrupt dependent timer */
> > > + reset_timer_masked();
> > > +
> > > + /* wait while polling the status register */
> > > + while (((status = *addr) & (FPW) 0x00800080) != (FPW)
> > > 0x00800080) {
> > > + if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
> > > + *addr = (FPW) 0x00FF00FF; /*
> > > restore read mode */
> > > + return (1);
> > > + }
> > > + }
> > > +
> > > + *addr = (FPW) 0x00FF00FF; /* restore read mode */
> > > +
> > > + return (0);
> > > +}
> > > +
> > > +void inline
> > > +spin_wheel(void)
> > > +{
> > > + static int p = 0;
> > > + static char w[] = "\\/-";
> > > +
> > > + printf("\010%c", w[p]);
> > > + (++p == 3) ? (p = 0) : 0;
> > > +}
> > > diff -x CVS -ruN u-boot.orig/board/gcplus/gcplus.c
> > > u-boot.new/board/gcplus/gcplus.c
> > > --- u-boot.orig/board/gcplus/gcplus.c 1969-12-31
> > > 19:00:00.000000000 -0500
> > > +++ u-boot.new/board/gcplus/gcplus.c 2004-03-09
> > > 21:52:57.000000000 -0500
> > > @@ -0,0 +1,73 @@
> > > +/*
> > > + * (C) Copyright 2002
> > > + * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> > > + * Marius Groeger <mgroeger at sysgo.de>
> > > + *
> > > + * 2003-2004 (c) MontaVista Software, Inc.
> > > + *
> > > + * See file CREDITS for list of people who contributed to this
> > > + * project.
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License as
> > > + * published by the Free Software Foundation; either version 2 of
> > > + * the License, or (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public License
> > > + * along with this program; if not, write to the Free Software
> > > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > > + * MA 02111-1307 USA
> > > + */
> > > +
> > > +#include <common.h>
> > > +#include <SA-1100.h>
> > > +/*
> > > --------------------------------------------------------------
> > > ----------- */
> > > +
> > > +/*
> > > + * Miscelaneous platform dependent initialisations
> > > + */
> > > +
> > > +int
> > > +board_init(void)
> > > +{
> > > + DECLARE_GLOBAL_DATA_PTR;
> > > +
> > > + gd->bd->bi_arch_number = 29; /* ADS
> > > GraphicsClientPlus Board */
> > > +
> > > + gd->bd->bi_boot_params = 0xc000003c; /* Weird address? */
> > > +
> > > + /* Most of the ADS GCPlus I/O is connected to Static nCS2.
> > > + * So I'm brute forcing nCS2 timiming here for worst case.
> > > + */
> > > + MSC1 &= ~0xFFFF;
> > > + MSC1 |= 0x8649;
> > > +
> > > + /* Nothing is connected to Static nCS4 or nCS5. But I'm using
> > > + * nCS4 as a paranoia safe guard to force nCS2, nOE; nWE high
> > > + * after accessing I/O via (non-VLIO) nCS2. What can I say, I'm
> > > + * paranoid and lack decent tools to alleviate my fear. I sure
> > > + * do wish I had a logic analyzer. : (
> > > + */
> > > +
> > > + MSC2 = 0xfff9fff9;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +int
> > > +dram_init(void)
> > > +{
> > > + DECLARE_GLOBAL_DATA_PTR;
> > > +
> > > + gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> > > + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> > > + gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
> > > + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
> > > +
> > > + return (0);
> > > +}
> > > diff -x CVS -ruN u-boot.orig/board/gcplus/Makefile
> > > u-boot.new/board/gcplus/Makefile
> > > --- u-boot.orig/board/gcplus/Makefile 1969-12-31
> > > 19:00:00.000000000 -0500
> > > +++ u-boot.new/board/gcplus/Makefile 2004-03-09
> > > 21:50:31.000000000 -0500
> > > @@ -0,0 +1,49 @@
> > > +#
> > > +# (C) Copyright 2000
> > > +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > > +#
> > > +# 2003 (c) MontaVista Software, Inc.
> > > +#
> > > +# See file CREDITS for list of people who contributed to this
> > > +# project.
> > > +#
> > > +# This program is free software; you can redistribute it and/or
> > > +# modify it under the terms of the GNU General Public License as
> > > +# published by the Free Software Foundation; either version 2 of
> > > +# the License, or (at your option) any later version.
> > > +#
> > > +# This program is distributed in the hope that it will be useful,
> > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > +# GNU General Public License for more details.
> > > +#
> > > +# You should have received a copy of the GNU General Public License
> > > +# along with this program; if not, write to the Free Software
> > > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > > +# MA 02111-1307 USA
> > > +#
> > > +
> > > +include $(TOPDIR)/config.mk
> > > +
> > > +LIB = lib$(BOARD).a
> > > +
> > > +OBJS := gcplus.o flash.o
> > > +SOBJS := memsetup.o
> > > +
> > > +$(LIB): $(OBJS) $(SOBJS)
> > > + $(AR) crv $@ $(OBJS) $(SOBJS)
> > > +
> > > +clean:
> > > + rm -f $(SOBJS) $(OBJS)
> > > +
> > > +distclean: clean
> > > + rm -f $(LIB) core *.bak .depend
> > > +
> > > +#############################################################
> > > ############
> > > +
> > > +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
> > > + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
> > > +
> > > +-include .depend
> > > +
> > > +#############################################################
> > > ############
> > > diff -x CVS -ruN u-boot.orig/board/gcplus/memsetup.S
> > > u-boot.new/board/gcplus/memsetup.S
> > > --- u-boot.orig/board/gcplus/memsetup.S 1969-12-31
> > > 19:00:00.000000000 -0500
> > > +++ u-boot.new/board/gcplus/memsetup.S 2004-03-09
> > > 23:12:53.000000000 -0500
> > > @@ -0,0 +1,77 @@
> > > +/*
> > > + * Memory Setup stuff - taken from blob memsetup.S
> > > + *
> > > + * Copyright (C) 1999 2000 2001 Erik Mouw
> > > (J.A.K.Mouw at its.tudelft.nl) and
> > > + * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
> > > + * 2003-2004 (c) MontaVista Software, Inc.
> > > + *
> > > + * See file CREDITS for list of people who contributed to this
> > > + * project.
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License as
> > > + * published by the Free Software Foundation; either version 2 of
> > > + * the License, or (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public License
> > > + * along with this program; if not, write to the Free Software
> > > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > > + * MA 02111-1307 USA
> > > + */
> > > +
> > > +
> > > +#include "config.h"
> > > +#include "version.h"
> > > +
> > > +
> > > + .globl memsetup
> > > +memsetup:
> > > + /* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory
> > > init for us.
> > > + * However the darn thing leaves the MMU enabled before
> > > handing control
> > > + * over to us. So we need to disable the MMU and we use memsetup
> > > + * to do it.
> > > + */
> > > +
> > > +@ The following code segment was borrowed with gratitude from:
> > > +@ linux-2.4.19-rmk7/arch/arm/boot/compressed/head-sa1100.S
> > > +
> > > + @ Data cache might be active.
> > > + @ Be sure to flush kernel binary out of the cache,
> > > + @ whatever state it is, before it is turned off.
> > > + @ This is done by fetching through currently executed
> > > + @ memory to be sure we hit the same cache.
> > > + bic r2, pc, #0x1f
> > > + add r3, r2, #0x4000 @ 16 kb is quite enough...
> > > +1: ldr r0, [r2], #32
> > > + teq r2, r3
> > > + bne 1b
> > > + mcr p15, 0, r0, c7, c10, 4 @ drain WB
> > > + mcr p15, 0, r0, c7, c7, 0 @ flush I & D caches
> > > +
> > > + @ disabling MMU and caches
> > > + mrc p15, 0, r0, c1, c0, 0 @ read control reg
> > > + bic r0, r0, #0x0d @ clear WB, DC, MMU
> > > + bic r0, r0, #0x1000 @ clear Icache
> > > + mcr p15, 0, r0, c1, c0, 0
> > > +
> > > + nop
> > > + nop
> > > + nop
> > > + nop
> > > + nop
> > > +
> > > + b 2f
> > > +2:
> > > + nop
> > > + nop
> > > + nop
> > > + nop
> > > + nop
> > > +
> > > +
> > > + mov pc, lr
> > > diff -x CVS -ruN u-boot.orig/board/gcplus/u-boot.lds
> > > u-boot.new/board/gcplus/u-boot.lds
> > > --- u-boot.orig/board/gcplus/u-boot.lds 1969-12-31
> > > 19:00:00.000000000 -0500
> > > +++ u-boot.new/board/gcplus/u-boot.lds 2004-03-06
> > > 16:03:44.000000000 -0500
> > > @@ -0,0 +1,57 @@
> > > +/*
> > > + * (C) Copyright 2000
> > > + * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > > + * 2003 (c) MontaVista Software, Inc.
> > > + *
> > > + * See file CREDITS for list of people who contributed to this
> > > + * project.
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License as
> > > + * published by the Free Software Foundation; either version 2 of
> > > + * the License, or (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public License
> > > + * along with this program; if not, write to the Free Software
> > > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > > + * MA 02111-1307 USA
> > > + */
> > > +
> > > +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm",
> > > "elf32-littlearm")
> > > +OUTPUT_ARCH(arm)
> > > +ENTRY(_start)
> > > +SECTIONS
> > > +{
> > > + . = 0x00000000;
> > > +
> > > + . = ALIGN(4);
> > > + .text :
> > > + {
> > > + cpu/sa1100/start.o (.text)
> > > + *(.text)
> > > + }
> > > +
> > > + . = ALIGN(4);
> > > + .rodata : { *(.rodata) }
> > > +
> > > + . = ALIGN(4);
> > > + .data : { *(.data) }
> > > +
> > > + . = ALIGN(4);
> > > + .got : { *(.got) }
> > > +
> > > +
> > > + __u_boot_cmd_start = .;
> > > + .u_boot_cmd : { *(.u_boot_cmd) }
> > > + __u_boot_cmd_end = .;
> > > +
> > > + . = ALIGN(4);
> > > + __bss_start = .;
> > > + .bss : { *(.bss) }
> > > + _end = .;
> > > +}
> > > diff -x CVS -ruN u-boot.orig/include/configs/gcplus.h
> > > u-boot.new/include/configs/gcplus.h
> > > --- u-boot.orig/include/configs/gcplus.h 1969-12-31
> > > 19:00:00.000000000 -0500
> > > +++ u-boot.new/include/configs/gcplus.h 2004-03-11
> > > 09:41:31.000000000 -0500
> > > @@ -0,0 +1,174 @@
> > > +/*
> > > + * (C) Copyright 2002
> > > + * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> > > + * Marius Groeger <mgroeger at sysgo.de>
> > > + *
> > > + * 2003-2004 (c) MontaVista Software, Inc.
> > > + *
> > > + * Configuation settings for the ADS GraphicsClient+ board.
> > > + *
> > > + * See file CREDITS for list of people who contributed to this
> > > + * project.
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > + * modify it under the terms of the GNU General Public License as
> > > + * published by the Free Software Foundation; either version 2 of
> > > + * the License, or (at your option) any later version.
> > > + *
> > > + * This program is distributed in the hope that it will be useful,
> > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + * GNU General Public License for more details.
> > > + *
> > > + * You should have received a copy of the GNU General Public License
> > > + * along with this program; if not, write to the Free Software
> > > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > > + * MA 02111-1307 USA
> > > + */
> > > +
> > > +#ifndef __CONFIG_H
> > > +#define __CONFIG_H
> > > +
> > > +#undef DEBUG
> > > +
> > > +/*
> > > + * The ADS GCPlus Linux boot ROM loads U-Boot into RAM at 0xc0200000.
> > > + * We don't actually init RAM in this case since we're using
> > > U-Boot as
> > > + * an secondary boot loader during Linux kernel development
> > > and testing,
> > > + * e.g. bootp/tftp download of the kernel is a far more convenient
> > > + * when testing new kernels on this target. However the ADS
> > > GCPlus Linux
> > > + * boot ROM leaves the MMU enabled when it passes control to
> > > U-Boot. So
> > > + * we use memsetup (CONFIG_INIT_CRITICAL) to remedy that problem.
> > > + */
> > > +#define CONFIG_INIT_CRITICAL
> > > +
> > > +/*
> > > + * High Level Configuration Options
> > > + * (easy to change)
> > > + */
> > > +#define CONFIG_SA1110 1 /* This is an
> > > SA1100 CPU */
> > > +#define CONFIG_GCPLUS 1 /* on an ADS
> > > GCPlus Board */
> > > +
> > > +#undef CONFIG_USE_IRQ /* we don't
> > > need IRQ/FIQ stuff */
> > > +
> > > +#define CONFIG_CMDLINE_TAG 1 /* enable passing of
> > > ATAGs */
> > > +#define CONFIG_SETUP_MEMORY_TAGS 1
> > > +#define CONFIG_INITRD_TAG 1
> > > +
> > > +/*
> > > + * Size of malloc() pool
> > > + */
> > > +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
> > > +#define CFG_GBL_DATA_SIZE 128 /* size rsrvd for
> > > initial data */
> > > +
> > > +
> > > +/*
> > > + * Hardware drivers
> > > + */
> > > +#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194
> > > on-board */
> > > +#define CONFIG_LAN91C96_BASE 0x100e0000
> > > +
> > > +/*
> > > + * select serial console configuration
> > > + */
> > > +#define CONFIG_SERIAL3 1 /* we use SERIAL 3 on
> > > ADS GCPlus */
> > > +
> > > +/* allow to overwrite serial and ethaddr */
> > > +#define CONFIG_ENV_OVERWRITE
> > > +
> > > +#define CONFIG_BAUDRATE 38400
> > > +
> > > +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
> > > +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
> > > +
> > > +/* this must be included AFTER the definition of
> > > CONFIG_COMMANDS (if any) */
> > > +#include <cmd_confdefs.h>
> > > +
> > > +#define CONFIG_BOOTDELAY 3
> > > +#define CONFIG_BOOTARGS "console=ttySA0,38400n8
> > > mtdparts=sa1100-flash:1m at 0(zImage),3m at 1m(ramdisk.gz),12m at 4m(us
> > > erfs) root=/dev/nfs ip=bootp"
> > > +#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
> > > +#define CFG_AUTOLOAD "n" /* No autoload */
> > > +
> > > +#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
> > > +#define CONFIG_KGDB_BAUDRATE 38400 /* speed to run
> > > kgdb serial port */
> > > +#define CONFIG_KGDB_SER_INDEX 2 /*
> > > which serial port to use */
> > > +#endif
> > > +
> > > +/*
> > > + * Miscellaneous configurable options
> > > + */
> > > +#define CFG_LONGHELP /*
> > > undef to save memory */
> > > +#define CFG_PROMPT "ADS GCPlus # " /*
> > > Monitor Command Prompt */
> > > +#define CFG_CBSIZE 256 /*
> > > Console I/O Buffer Size */
> > > +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
> > > /* Print Buffer Size */
> > > +#define CFG_MAXARGS 16 /* max
> > > number of command args */
> > > +#define CFG_BARGSIZE CFG_CBSIZE /* Boot
> > > Argument Buffer Size */
> > > +
> > > +#define CFG_MEMTEST_START 0xc0400000 /* memtest
> > > works on */
> > > +#define CFG_MEMTEST_END 0xc0800000 /* 4
> > > ... 8 MB in DRAM */
> > > +
> > > +#undef CFG_CLKS_IN_HZ /* everything, incl
> > > board info, in Hz */
> > > +
> > > +#define CFG_LOAD_ADDR 0xc0000000 /*
> > > default load address */
> > > +
> > > +#define CFG_HZ 3686400 /*
> > > incrementer freq: 3.6864 MHz */
> > > +#define CFG_CPUSPEED 0x0a /* set core
> > > clock to 206MHz */
> > > +
> > > + /* valid baudrates */
> > > +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
> > > +
> > > +/*-----------------------------------------------------------
> > > ------------
> > > + * Stack sizes
> > > + *
> > > + * The stack sizes are set up in start.S using the settings below
> > > + */
> > > +#define CONFIG_STACKSIZE (128*1024) /* regular stack */
> > > +#ifdef CONFIG_USE_IRQ
> > > +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
> > > +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
> > > +#endif
> > > +
> > > +/*-----------------------------------------------------------
> > > ------------
> > > + * Physical Memory Map
> > > + */
> > > +#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */
> > > +#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
> > > +#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
> > > +#define PHYS_SDRAM_2 0xc8000000 /* SDRAM Bank #2 */
> > > +#define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */
> > > +
> > > +
> > > +#define PHYS_FLASH_1 0x08000000 /* Flash Bank #1 */
> > > +#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */
> > > +#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */
> > > +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
> > > +
> > > +#define CFG_FLASH_BASE PHYS_FLASH_1
> > > +
> > > +/*-----------------------------------------------------------
> > > ------------
> > > + * FLASH and environment organization
> > > + */
> > > +#if 1
> > > +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
> > > +#define CFG_MAX_FLASH_SECT 128 /* max number of
> > > sectors on one chip */
> > > +
> > > +/* timeout values are in ticks */
> > > +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
> > > +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
> > > +#else
> > > +/* REVISIT: This doesn't work on ADS GCPlus just yet:
> > > +#define CFG_FLASH_CFI 1 /* flash is CFI
> > > conformant */
> > > +#define CFG_FLASH_CFI_DRIVER 1 /* use common cfi
> > > driver */
> > > +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered
> > > writes (20x faster) */
> > > +#define CFG_MAX_FLASH_BANKS 1 /* max # of memory
> > > banks */
> > > +#define CFG_FLASH_INCREMENT 0 /* there is only one
> > > bank */
> > > +#define CFG_MAX_FLASH_SECT 128 /* max # of sectors
> > > on one chip */
> > > +//#define CFG_FLASH_PROTECTION 1 /* hardware flash
> > > protection */
> > > +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
> > > +#endif
> > > +
> > > +#define CFG_ENV_IS_IN_FLASH 1
> > > +#define CFG_ENV_ADDR (PHYS_FLASH_1 +
> > > PHYS_FLASH_SECT_SIZE) /* Addr of Environment Sector */
> > > +#define CFG_ENV_SIZE PHYS_FLASH_SECT_SIZE
> > > +
> > > +#endif /* __CONFIG_H */
> > > diff -x CVS -ruN u-boot.orig/Makefile u-boot.new/Makefile
> > > --- u-boot.orig/Makefile 2004-03-11 14:00:20.000000000 -0500
> > > +++ u-boot.new/Makefile 2004-03-09 23:16:52.000000000 -0500
> > > @@ -912,6 +912,9 @@
> > > shannon_config : unconfig
> > > @./mkconfig $(@:_config=) arm sa1100 shannon
> > >
> > > +gcplus_config : unconfig
> > > + @./mkconfig $(@:_config=) arm sa1100 gcplus
> > > +
> > >
> > > ##############################################################
> > > ###########
> > > ## ARM92xT Systems
> > >
> > > ##############################################################
> > > ###########
> > >
> > >
> > > -------------------------------------------------------
> > > This SF.Net email is sponsored by: IBM Linux Tutorials
> > > Free Linux tutorial presented by Daniel Robbins, President and CEO of
> > > GenToo technologies. Learn everything from fundamentals to system
> > > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> > > _______________________________________________
> > > U-Boot-Users mailing list
> > > U-Boot-Users at lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/u-boot-users
> > >
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
--
Matthew S. McClintock <mattsm at arlut.utexas.edu>
More information about the U-Boot
mailing list