R: [U-Boot-Users] loading linux in FADS860T board through u-boot-1.0.0

[Figini Enzo]

> -----Messaggio originale-----
> Da: u-boot-users-admin at lists.sourceforge.net
> [mailto:u-boot-users-admin at lists.sourceforge.net]Per conto di RamanaYV
> Inviato: giovedì 17 gennaio 2002 11.33
> A: u-boot-users at lists.sourceforge.net
> Oggetto: [U-Boot-Users] loading linux in FADS860T board through
> u-boot-1.0.0
>
>
> I was trying to load linux-2.4.4 in FADS860T board using u-boot-1.0.0.
>
> I have settted environment variables like
> ipaddr,serverip,ethaddr,bootargs
> bootfile and saved the environment.
>
> Then,i typed tftpboot to download image from server.
>
> Then,i typed bootm to start the booting process.
>
> System is stucked by showing "Uncompressing Kernel Image ... OK"
>
Is CONFIG_CLOCKS_IN_MHZ defined ???
If I remember, should be defined until linux 2.4.5.
I had the same problem with 2.4.19 (it was defined).

Enzo

>
>
> sequence of these events r given below.can u please suggest,
> what i need to
> do to come out from this.
>
> Thank you.
>
>
>
>
>
> U-Boot 1.0.0 (Mar 17 2004 - 14:06:16)
>
>
>
> CPU: XPC86xxxZPnnD4 at 40 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
>
> Board: FADS with db MPC821, MPC860 / MPC860SAR / MPC860T rev PILOT
>
> DRAM: (4 MB SDRAM) 4M 60ns DRAM: 8 MB
>
> FLASH: 2 MB
>
> In: serial
>
> Out: serial
>
> Err: serial
>
> Net: FEC ETHERNET
>
>
>
> =>printenv
>
> stdin=serial
>
> stdout=serial
>
> stderr=serial
>
> Environment size: 41/16380 bytes
>
>
>
> =>setenv ipaddr 192.168.1.115
>
> =>setenv serverip 192.168.1.87
>
> =>setenv ip 192.168.1.115
>
> =>setenv ethaddr 00:30:bf:01:02:d0
>
> =>setenv bootargs "root=/dev/nfs rw
> nfsroot=192.168.1.87:/opt/eldk/ppc8xx
> ip=192
>
> .168.1.115:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off"
>
> =>setenv bootfile "pImage_fads_fec"
>
>
>
> =>saveenv
>
> Saving Environment to Flash...
>
> Un-Protected 1 sectors
>
> Erasing Flash...
>
> . done
>
> Erased 1 sectors
>
> Writing to Flash... done
>
> Protected 1 sectors
>
>
>
> =>printenv
>
> stdin=serial
>
> stdout=serial
>
> stderr=serial
>
> ipaddr=192.168.1.115
>
> serverip=192.168.1.87
>
> ip=192.168.1.115
>
> ethaddr=00:30:bf:01:02:d0
>
> bootargs="root=/dev/nfs rw
> nfsroot=192.168.1.87:/opt/eldk/ppc8xx ip=192.168
> 1.11
>
> 5:192.168.1.87:192.168.1.115:255.255.255.0:ppc::off"
>
> bootfile="pImage_fads_fec"
>
> Environment size: 287/16380 bytes
>
>
>
> =>tftpboot
>
> TFTP from server 192.168.1.87; our IP address is 192.168.1.115
>
> Filename 'pImage_fads_fec'.
>
> Load address: 0x100000
>
> Loading: T invalid RARP header
>
> #####################################################TX timeout
>
> ############
>
> #######################
>
> done
>
> Bytes transferred = 448321 (6d741 hex)
>
>
>
> =>bootm
>
> ## Booting image at 00100000 .
>
> Image Name: Linux-2.4.4
>
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
>
> Data Size: 448257 Bytes = 437.8 kB
>
> Load Address: 00000000
>
> Entry Point: 00000000
>
> Verifying Checksum ... OK
>
> Uncompressing Kernel Image ... OK
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users