[U-Boot-Users] miiphy_speed() broken after latest patch...

Tolunay Orkun listmember at orkun.us
Fri Mar 19 21:12:55 CET 2004


Aha another wierd Intel one but it was saved by the value 0 since neither
PHY_1000BTSR_1000FD nor PHY_1000BTSR_1000HD was set.

Nevertheless, The patch I've just submitted makes GIGE PHY detection code
conditional so no 1000Mbps detection will be attempted for 10/100 Mbps PHY
(smaller code).

Best regards,
Tolunay

> Read on a LXT973 Dual Phy returns (mii read) an errro on register 9 and
> 0x0000 on register 0x0a
> (lxt973 is a dual 10/100 phy)
>
>> I am afraid I cannot say that. Perhaps folks on the list try
>> "mii read" command to test if register 0xA is returning other
>> than 0xffff.






More information about the U-Boot mailing list