[U-Boot-Users] Rarpboot problem

[ganapathi]

Hello Wolfgang Denk,
        I am planning to use the rarpboot to assign IP for my client(UUT).
The rarpboot  in the u-boot framework is tested ?.  when i issue an command
as follows i am getting the error

rarpboot 0x800000 linux.dxe

I am getting the following

Boot File linux.dxe
RARP broadcast 1
Filename 'linux.dxe'.
Load address: 0x800000
Loading: *

But dhcp is working fine.

please help as soon as possible.

Regards
Ganapathi C

----- Original Message ----- 
From: "Wolfgang Denk" <wd at denx.de>
To: "Stuart Wood" <swood at rochester.rr.com>
Cc: "Robin Gilks" <robin.gilks at tait.co.nz>; "u-boot"
<u-boot-users at lists.sourceforge.net>
Sent: Monday, March 22, 2004 4:24 PM
Subject: Re: [U-Boot-Users] MCF5282 Ethernet Trouble formally TFTP Trouble


> In message <200403212151.17556.swood at rochester.rr.com> you wrote:
> >
> > > Check the clocks on the phy and the ethernet controller - sounds like
it
> > > never gets to transmit at all.
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> > Does any one have any ideas of what I should try next?
>
> As mentioned before: check your clock configuration.
>
> Best regards,
>
> Wolfgang Denk
>
> -- 
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
> I can type faster than I can move a  mouse,  so  I  find  menu-driven
> drawing packages time consuming and frustrating.      - W. R. Stevens
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux Tutorials
> Free Linux tutorial presented by Daniel Robbins, President and CEO of
> GenToo technologies. Learn everything from fundamentals to system
> administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users