[U-Boot-Users] [Patch#1/3]: New board support : RPXlite_DW

Sam Song samsongshu at yahoo.com.cn
Thu May 6 09:43:22 CEST 2004


Hi,Wolfgang,

Sorry for some unnecessary mistakes I made to bring
you in 'hot water'.

* Patch by Sam Song, 06 May 2004:
  - Add support for RPXlite_DW board
  - Update FLASH driver for 4*AM29DL323DB90VI
  - Update SDRAM init for 2*MT48LC16M16A2-75 in
9-column mode
  - Add option configuration for LCD
panel,NL6448BC20-08
  - Add option configuration of CFG_ENV_IS_IN_NVRAM on
RPXlite_DW board 

Attached pls see the patch.All against u-boot-1.1.1.

Best regards,

Sam

====================================================

diff -purN u-boot-1.1.1/CREDITS
u-boot-1.1.1-send/CREDITS
--- u-boot-1.1.1/CREDITS	Fri Apr 16 07:23:39 2004
+++ u-boot-1.1.1-send/CREDITS	Thu May  6 14:32:22 2004
@@ -198,6 +198,10 @@ N: Yoo. Jonghoon
 E: yooth at ipone.co.kr
 D: Added port to the RPXlite board
 
+N: Sam Song
+E: samsongshu at yahoo.com.cn
+D: Port to the RPXlite_DW board
+
 N: Brad Kemp
 E: Brad.Kemp at seranoa.com
 D: Port to Windriver ppmc8260 board
diff -purN u-boot-1.1.1/MAKEALL
u-boot-1.1.1-send/MAKEALL
--- u-boot-1.1.1/MAKEALL	Mon Apr 19 07:32:11 2004
+++ u-boot-1.1.1-send/MAKEALL	Thu May  6 14:58:55 2004
@@ -45,10 +45,11 @@ LIST_8xx="	\
 	MPC86xADS	MVS1		NETVIA		NETVIA_V2	\
 	NX823		pcu_e		QS823		QS850		\
 	QS860T		R360MPI		RBC823		rmu		\
-	RPXClassic	RPXlite		RRvision	SM850		\
-	SPD823TS	svm_sc8xx	SXNI855T	TOP860		\
-	TQM823L		TQM823L_LCD	TQM850L		TQM855L		\
-	TQM860L		v37		NETTA		NETPHONE	\
+	RPXClassic	RPXlite		RPXlite_DW	RRvision	\
+	SM850		SPD823TS	svm_sc8xx	SXNI855T	\
+	TOP860		TQM823L		TQM823L_LCD	TQM850L		\
+	TQM855L		TQM860L		v37		NETTA		\
+	NETPHONE	\
 "
 

#########################################################################
diff -purN u-boot-1.1.1/Makefile
u-boot-1.1.1-send/Makefile
--- u-boot-1.1.1/Makefile	Sun Apr 25 07:23:30 2004
+++ u-boot-1.1.1-send/Makefile	Tue May  4 22:06:37
2004
@@ -457,6 +457,30 @@ RPXClassic_config:	unconfig
 RPXlite_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx RPXlite
 
+RPXlite_DW_64_config  		\
+RPXlite_DW_LCD_config 		\
+RPXlite_DW_64_LCD_config 	\
+RPXlite_DW_FLASH_config		\
+RPXlite_DW_FLASH_64_config      \
+RPXlite_DW_FLASH_LCD_config	\
+RPXlite_DW_FLASH_64_LCD_config  \
+RPXlite_DW_config:         unconfig
+	@ >include/config.h
+	@[ -z "$(findstring _64,$@)" ] || \
+		{ echo "#define RPXlite_64MHz"		>>include/config.h
; \
+		  echo "... with 64MHz system clock ..."; \
+		}
+	@[ -z "$(findstring _LCD,$@)" ] || \
+		{ echo "#define CONFIG_LCD"          
>>include/config.h ; \
+		  echo "#define CONFIG_NEC_NL6448BC20"
>>include/config.h ; \
+		  echo "... with LCD display ..."; \
+		}
+	@[ -z "$(findstring _FLASH,$@)" ] || \
+		{ echo "#define  CFG_ENV_IS_IN_FLASH" 
>>include/config.h ; \
+		  echo "... with ENV in FLASH ..."; \
+		}
+	@./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw
+
 rmu_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx rmu
 
diff -purN u-boot-1.1.1/README
u-boot-1.1.1-send/README
--- u-boot-1.1.1/README	Sat Apr 24 04:32:05 2004
+++ u-boot-1.1.1-send/README	Thu May  6 15:01:09 2004
@@ -2036,11 +2036,11 @@ configurations; the following
names are 
 	omap1510inn_config	omap1610h2_config
omap1610inn_config
 	pcu_e_config		PIP405_config		QS823_config
 	QS850_config		QS860T_config		RPXlite_config
-	RPXsuper_config		rsdproto_config	
Sandpoint8240_config
-	sbc8260_config		SM850_config		SPD823TS_config
-	stxgp3_config		SXNI855T_config		TQM823L_config
-	TQM850L_config		TQM855L_config		TQM860L_config
-	WALNUT405_config	ZPC1900_config
+	RPXlite_DW_config	RPXsuper_config		rsdproto_config
+	Sandpoint8240_config	sbc8260_config		SM850_config
+	SPD823TS_config		stxgp3_config		SXNI855T_config		
+	TQM823L_config		TQM850L_config		TQM855L_config
+	TQM860L_config		WALNUT405_config	ZPC1900_config
 
 	Note: for some board special configuration names may
exist; check  if
 	      additional  information is available from the
board vendor; for
diff -purN u-boot-1.1.1/board/RPXlite_dw/Makefile
u-boot-1.1.1-send/board/RPXlite_dw/Makefile
--- u-boot-1.1.1/board/RPXlite_dw/Makefile	Thu Jan  1
08:00:00 1970
+++ u-boot-1.1.1-send/board/RPXlite_dw/Makefile	Mon
May  3 19:46:19 2004
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering,
wd at denx.de.
+#
+# See file CREDITS for list of people who contributed
to this
+# project.
+#
+# This program is free software; you can redistribute
it and/or
+# modify it under the terms of the GNU General Public
License as
+# published by the Free Software Foundation; either
version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it
will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied
warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General
Public License
+# along with this program; if not, write to the Free
Software
+# Foundation, Inc., 59 Temple Place, Suite 330,
Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) >
$@
+
+sinclude .depend
+
+#########################################################################
diff -purN u-boot-1.1.1/board/RPXlite_dw/RPXlite_dw.c
u-boot-1.1.1-send/board/RPXlite_dw/RPXlite_dw.c
--- u-boot-1.1.1/board/RPXlite_dw/RPXlite_dw.c	Thu Jan
 1 08:00:00 1970
+++ u-boot-1.1.1-send/board/RPXlite_dw/RPXlite_dw.c
Tue May  4 22:01:44 2004
@@ -0,0 +1,189 @@
+/*
+ * (C) Copyright 2004
+ * Sam Song, IEMC. SHU, samsongshu at yahoo.com.cn
+ *
+ * See file CREDITS for list of people who
contributed to this
+ * project.
+ *
+ * This program is free software; you can
redistribute it and/or
+ * modify it under the terms of the GNU General
Public License as
+ * published by the Free Software Foundation; either
version 2 of
+ * the License, or (at your option) any later
version.
+ *
+ * This program is distributed in the hope that it
will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied
warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General
Public License
+ * along with this program; if not, write to the Free
Software
+ * Foundation, Inc., 59 Temple Place, Suite 330,
Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Sam Song 
+ * U-Boot port on RPXlite DW board : RPXlite_DW or
LITE_DW 
+ * Tested on working at
64MHz(CPU)/32MHz(BUS),48MHz/24MHz 
+ * with 64MB, 2 SDRAM Micron chips,MT48LC16M16A2-75.
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/*
-------------------------------------------------------------------------
*/
+
+static long int dram_size (long int, long int *, long
int);
+
+/*
-------------------------------------------------------------------------
*/
+
+#define	_NOT_USED_	0xFFFFCC25
+
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 00h in UPMA RAM)
+	 */
+	0x0F03CC04, 0x00ACCC24, 0x1FF74C20, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_,
+	
+	/*
+	 * Burst Read. (Offset 08h in UPMA RAM)
+	 */
+	0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20,
+	0x01FFCC20, 0x1FF74C20, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Single Write. (Offset 18h in UPMA RAM)
+	 */
+	0x0F03CC02, 0x00AC0C24, 0x1FF74C25, /* last */
+	_NOT_USED_, _NOT_USED_, 0x0FA00C34,0x0FFFCC35,
+	_NOT_USED_,
+
+	/*
+	 * Burst Write. (Offset 20h in UPMA RAM)
+	 */
+	0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22,
+	0x01FFFC24, 0x1FF74C25, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Refresh. (Offset 30h in UPMA RAM)
+	 */
+	0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34, 
+	0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34, 0x0FFFCCB4,
+	/* INIT sequence RAM WORDS
+	 * SDRAM Initialization (offset 0x36 in UPMA RAM)
+         * The above definition uses the remaining
space 
+	 * to establish an initialization sequence, 
+	 * which is executed by a RUN command.
+         * The sequence is COMMAND
INHIBIT(NOP),Precharge,
+         * Load Mode Register,NOP,Auto Refresh.
+	 * **[Sam]**
+         */
+
+	/*
+	 * Exception. (Offset 3Ch in UPMA RAM)
+	 */
+	0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_
+};
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	puts ("Board: RPXlite_DW\n") ;
+	return (0) ;
+}
+
+/*
-------------------------------------------------------------------------
*/
+
+long int initdram (int board_type)
+{
+	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+        volatile memctl8xx_t *memctl =
&immap->im_memctl;
+	long int size9; 
+	
+	upmconfig(UPMA, (uint *)sdram_table,
sizeof(sdram_table)/sizeof(uint));
+
+	/* Refresh clock prescalar */
+        memctl->memc_mptpr = CFG_MPTPR ;
+
+        memctl->memc_mar  = 0x00000088;       
+	
+	/* Map controller banks 1 to the SDRAM bank */
+        memctl->memc_or1 = CFG_OR1_PRELIM;
+        memctl->memc_br1 = CFG_BR1_PRELIM;
+	
+        memctl->memc_mamr = CFG_MAMR_9COL &
(~(MAMR_PTAE)); /* no refresh yet */ 	
+	/*Disable Periodic timer A. */
+	
+ 	udelay(200);
+
+        /* perform SDRAM initializsation sequence */
+
+	memctl->memc_mcr  = 0x80002236; /* SDRAM bank 0 -
refresh twice */
+	
+	udelay(1); 
+	
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+	/*Enable Periodic timer A */
+		
+        udelay (1000);
+
+	 /* Check Bank 0 Memory Size
+	  * try 9 column mode
+	  */
+
+	size9 = dram_size (CFG_MAMR_9COL, (ulong
*)SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE);
+	
+	/*
+	 * Final mapping:
+	 */
+
+	 memctl->memc_or1 = ((-size9) & 0xFFFF0000) |
CFG_OR_TIMING_SDRAM;
+	
+	 udelay (1000);
+	
+	return (size9);
+}
+
+void rpxlite_init (void)
+{
+        /* Enable NVRAM */
+        *((uchar *) BCSR0) |= BCSR0_ENNVRAM;
+}
+
+/*
-------------------------------------------------------------------------
*/
+
+/*
+ * Check memory range for valid RAM. A simple memory
test determines
+ * the actually available RAM size between addresses
`base' and
+ * `base + maxsize'. Some (not all) hardware errors
are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+
+
+static long int dram_size (long int mamr_value, long
int *base, 
+			   long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	memctl->memc_mamr = mamr_value;
+
+	return (get_ram_size (base, maxsize));
+					
+}
diff -purN u-boot-1.1.1/board/RPXlite_dw/config.mk
u-boot-1.1.1-send/board/RPXlite_dw/config.mk
--- u-boot-1.1.1/board/RPXlite_dw/config.mk	Thu Jan  1
08:00:00 1970
+++ u-boot-1.1.1-send/board/RPXlite_dw/config.mk	Mon
May  3 19:46:19 2004
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering,
wd at denx.de.
+# Sam Song, IEMC. SHU, samsongshu at yahoo.com.cn
+#
+# See file CREDITS for list of people who contributed
to this
+# project.
+#
+# This program is free software; you can redistribute
it and/or
+# modify it under the terms of the GNU General Public
License as
+# published by the Free Software Foundation; either
version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it
will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied
warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General
Public License
+# along with this program; if not, write to the Free
Software
+# Foundation, Inc., 59 Temple Place, Suite 330,
Boston,
+# MA 02111-1307 USA
+#
+
+#
+# RPXlite dw boards : lite_dw
+#
+
+TEXT_BASE = 0xff000000


_________________________________________________________
Do You Yahoo!? 
嫌邮箱太小?雅虎电邮自助扩容!
http://cn.rd.yahoo.com/mail_cn/tag/10m/*http://cn.mail.yahoo.com/event/10m.html




More information about the U-Boot mailing list