[U-Boot-Users] Re: MAKEALL script error on several boards

[Wolfgang Denk]

In message <20040506082008.93556.qmail at web15205.mail.bjs.yahoo.com> you wrote:
> 
> When trying MAKEALL script before sending new board
> patch,I got following errors.Then I tested MAKEALL in
> orignal u-boot-1.1.1,still the same.Following is my
> 'make' process for these four boards.Maybe it was just
> releated with my gcc tool version? I hope so...
> 
> Best regards,
> 
> Sam
> 
> =====================================================
> 
> make MPC8560ADS_config
...
> Error: invalid switch -me500

See "doc/README.mpc85xxads"

> 
> ====================================================
> 
> make  stxgp3_config

Ditto.


> ====================================================
> 
> make AR405_config

>  -Map u-boot.map -o u-boot
> ppc_8xx-ld: u-boot: Not enough room for program

Known problem, the board maintainer (Stefan Röse) knows about it  and
will handle it as soon as he has time.


> =====================================================
> 
> make ERIC_config
> 
> -Map u-boot.map -o u-boot
> ppc_8xx-ld: u-boot: Not enough room for program

Known problem, but there is no board maintainer to take care.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Diplomacy is the art of saying "nice doggy" until you can find a rock.