[U-Boot-Users] (no subject)

[Vidya S]

hi,

i am using smc driver for blackfin processor. it working fine. i am not sure of the question u have asked.
i mean, i havent done any change other than what has been released by you. i havent added any init in eth.c

regards
vidya

-----Original Message-----
From: u-boot-users-admin at lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of Wolfgang
Kanovsky
Sent: Thursday, May 13, 2004 9:37 PM
To: U-Boot-Users
Subject: [U-Boot-Users] (no subject)
Importance: High



Hi
anyone here who knows how the CONFIG_DRIVER_SMC91111  is used ..when the
chip is on the ISA - BUS

mean it is not in the eth.c file for init ( i have configured it in the
board.h file ...)?

greets
Wolfgang K.



-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users