[U-Boot-Users] OCOTEA configuration of active ethernet port

Daren Hayward darenh at 4bridgeworks.com
Fri May 21 13:56:33 CEST 2004


I don't know if anyone else has the same in the include/configs/OCOTEA.h,
but I had to set the #define CONFIG_ETHADDR2 to #define CONFIG_ETH2ADDR to
get the ethernet port to come up, it was the recognised as ethprime

-----Original Message-----
From: Daren Hayward 
Sent: 19 May 2004 17:56
To: U-Boot User List
Subject: [U-Boot-Users] OCOTEA configuration of active ethernet port


Hi,

I am trying to use ppc_440x_eth2 (GigE port), I have setenv ethact
ppc_440x_eth2 and ethprime to the same but the only port that seems to work
is eth0, any guidance would be appreciated

Cheers

Daren


-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users




More information about the U-Boot mailing list