[U-Boot-Users] question about installing U-boot

Mon May 24 18:49:21 CEST 2004

In message <001201c441a3$1efa2080$3136a8c0 at sassenage.massy.thalesees.com> you wrote:
> 
> I want to port it to an ML300 Board keeping in mind that  I must only
> put the configuration of the FPGA and the U-boot code in the compact
> Flash memory. (I must erase the contents of the compact flash given by
> xilinx)

Please explain what you have in mind. Put U-boot code in the CompactFlash?

You cannot run U-boot from a CmpactFlash card. You must use some real ROM.

> ------=_NextPart_000_000F_01C441B3.E22A4930
> Content-Type: text/html;
> 	charset="iso-8859-1"
> Content-Transfer-Encoding: quoted-printable
> 
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">

And please, NEVER post HTML to this list. Never!

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
PoB = "Prisoner of Bill" -- those held captive, unwillingly or other-
wise, by the contemptible Microsoft monopoly.
         -- Tom Christiansen in <6abo45$3lc$2 at csnews.cs.colorado.edu>