[U-Boot-Users] Re: flash erase

[Yuli Barcohen]

>>>>> Christian writes:

    Christian> When I use the CFI driver, it returns 0 after calling
    Christian> flash_detect_cfi(); And I got this error during boot...

    Christian> ## Unknown FLASH on Bank 0 - Size = 0x4caf1d39 =
    Christian> ## -745537536 MB

    Christian> It doesn't seem detect CFI interface.

I'm working now with an 8260-based board having 28F128J3 flash. The
driver works perfectly. There may be a configuration (or even hardware)
problem.

    Christian> It detects flash when I use the original source code...
    Christian> Manuf ID = 0x18 and Device ID = 0x18...

Manufacture ID is 0x89. Was 0x18 a typo or a problem indication?

-- 
========================================================================
 Yuli Barcohen       | Phone +972-9-765-1788 |  Software Project Leader
 yuli at arabellasw.com | Fax   +972-9-765-7494 | Arabella Software, Israel
========================================================================