[U-Boot-Users] PATCH: add low-boot configuration to MPC8260ADS family of boards

VanBaren, Gerald (AGRE) Gerald.VanBaren at smiths-aerospace.com
Mon Nov 8 16:11:11 CET 2004


Hi Wolfgang,

Attached is a patch to allow the MPC8260FADS family of boards to be
configured to boot either high (0xfff00000) or low (0x00000000).  It was
tested on a PQ2FADS-ZU (MPC8280 processor).  I slipped in an unrelated
change to the default load address and beg your indulgence in applying
that as well.

Thanks,
gvb


CHANGELOG:

* Patch by Jerry Van Baren 08 Nov 2004
  - Enhance the PQ2FADS board (aka. mpc8260ads) to boot high or low
based on
    whether "lowboot" is in the configuration target name.  If lowboot
is
    selected, the jumper for the HRCW source should select flash.  If
lowboot
    is not selected, the jumper for the HRCW source should select the
BCSR.

    The "boot low" configuration is highly recommended.  With this
    configuration, the HRCW sets the IMMR to 0xf0000000 to be directly
    compatible with linux (the IMMR is properly positioned and does not
need
    to be moved in start.S).

  - The patch also changes the default load base address to 0x00400000
(was
    0x00100000) to allow linux to boot properly.

******************************************
The following messages are brought to you by the Lawyers' League of
IdioSpeak:


******************************************
The information contained in, or attached to, this e-mail, may contain confidential information and is intended solely for the use of the individual or entity to whom they are addressed and may be subject to legal privilege.  If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager.  Please do not copy it for any purpose, or disclose its contents to any other person.  The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company.  The recipient should check this e-mail and any attachments for the presence of viruses.  The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email.
******************************************
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 041104a.patch
Type: application/octet-stream
Size: 4830 bytes
Desc: 041104a.patch
Url : http://lists.denx.de/pipermail/u-boot/attachments/20041108/02f9ce4e/attachment.obj 


More information about the U-Boot mailing list