[U-Boot-Users] RJ45 pinout of SBC8260

[VanBaren, Gerald (AGRE)]

> -----Original Message-----
> From: u-boot-users-admin at lists.sourceforge.net
> [mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf
> Of duo dong
> Sent: Monday, November 08, 2004 3:53 PM
> To: u-boot-users at lists.sourceforge.net
> Subject: [U-Boot-Users] RJ45 pinout of SBC8260
>
> Hi,
>
> I plan to load u-boot to a sbc8260 board. There is no
> document available for this board. Any one has information
> about the pinout of the RJ45 as a serial port of this board?
>
> Thanks for your help.
>
> DD

It is a RJ-11 (telephone style connector in the USofA), not a RJ45
(ethernet).  JP13 pin 1 goes to a MAX3223 R1IN, pin 2 to T1OUT, pin 3 is
unused, and pin 4 is ground.    JP14 has the same wiring to the MAX2332
R2IN, T2OUT.

gvb

******************************************
The following messages are brought to you by the Lawyers' League of
IdioSpeak:

******************************************
The information contained in, or attached to, this e-mail, may contain confidential information and is intended solely for the use of the individual or entity to whom they are addressed and may be subject to legal privilege.  If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager.  Please do not copy it for any purpose, or disclose its contents to any other person.  The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company.  The recipient should check this e-mail and any attachments for the presence of viruses.  The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email.
******************************************