[U-Boot-Users] Can the CPU load from flash without configuring it first?

[Wolfgang Denk]

In message <41A34BE4.1050305 at web.de> you wrote:
> Well, I think it *must* be that way, but to be sure I ask this probably 
> question, though:
> 
> If a MPC875 starts, it will try to boot from the device selected by 
> chip-select 0 (CS0), unless otherwise stated in the hard reset 
> configuration word.

Don't speculate. RTFM. Read the User's manual for the processor.  All
these issues are there explained in great detail.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Successful and fortunate crime is called virtue.             - Seneca