[U-Boot-Users] start.S code snippet doubt

[Nishant Galange]

Thank you Yuli. Thank you very much :-)

Regards,
Nishant


-----Original Message-----
From: Yuli Barcohen <yuli at arabellasw.com>
To: "Nishant Galange" <nishant.subs at myrealbox.com>
Date: Tue, 23 Nov 2004 11:58:55 +0200
Subject: Re: [U-Boot-Users] start.S code snippet doubt


This code fixes incorrect BADDR configuration caused by wrong HRCW
supplied by BCSR (FPGA) on some MPC8260ADS boards. It's configured as if
there was L2 cache so that lower address lines are not functional
(64-bit data bus). Without this code, such a board can't start from
32-bit flash SIMM. This code is for MPC8260ADS only so there should not
be any problem.

-- 
========================================================================
 Yuli Barcohen       | Phone +972-9-765-1788 |  Software Project Leader
 yuli at arabellasw.com | Fax   +972-9-765-7494 | Arabella Software, Israel
========================================================================