[U-Boot-Users] RPXlite_DW problem/solution U-boot CVS

[Wolfgang Denk]

In message <20041130145337.65907.qmail at web15601.mail.cnb.yahoo.com> you wrote:
> 
> OK, you can do that because there are only 16MB RAM on
> your board. So if you successfully port U-Boot on your
> 16MB RPXlite_DW board. I would meet you half way. Just
> Add "make RPXlite_DW_16MB" to support your board. So

No, please don't. It is trivial (less  than  15  lines  of  code)  to
support  both 8 and 9 column SDRAM chips with the same configuration,
so instead of littering the Makefile  with  countless  configurations
all  the  boards will be able to run the same U-Boot image. I already
poointed out how to do this.

> you just need add a CONFIG_RPXLITE_16MB macro in your

Don't. I will reject any such patches. Do it the Right Way (TM).

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
COBOL is for morons.                                 -- E.W. Dijkstra