[U-Boot-Users] help> on 8260 board, linux hangs

[김형기]

Hi

No , my reference board is made by a local company, i forget the name

the board has SDRAM and Flash and one ethernet...just basic items...


-----Original Message-----
From: Nghiem, Tien [mailto:TNghiem at oerlikon.ca]
Sent: Thursday, October 14, 2004 11:45 PM
To: ???
Subject: RE: [U-Boot-Users] help> on 8260 board, linux hangs


Hi,

What is your reference board? is it a MPC8260ADS?

-----Original Message-----
From: u-boot-users-admin at lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of
hkkim at sanesys.com
Sent: Monday, October 11, 2004 6:58 AM
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] help> on 8260 board, linux hangs


i  ported uboot-1.0.0 with success on my board , it works fine ( i think )

i can download kernel image and no problem with mtest

but when i enter "bootm"

"Uncompressing  kernel...OK" and no more message

 but  i tested it with a reference board , uboot-1.0.0 and kernel 2.4.4 from
(www.denx.de)

 on reference board it wokrs find  ( i searched mailing-list and found
"Uncompress...."  problem because of HZ issue or bd_t type error

i think that is not my case )


 i have no reference board circuit but i tried to designe  my board with
same momery ( type and
size)  , just  they differs in  CPU version
( reference is A.1 1K22A-XC , my board is C.2 6K23A   could it cause a
problem ? )

i use  the same uboot in both boards


 i have no idea what is wrong ?  SW or HW ?

 give me some ideas or hints

 thanks in advance














 NHYµéŠX²š²Šu¼L???‰L?°š®vR?švç²)?ºÈz?Y???’‡…éŠ÷±Š¬ê?°g·Ngh??q
«°)rK~)?¢·¶Ú?v??+jvz»¢?W›ø‰×®‰¶jPµK?ŠX‚X?¢Õz»ŠË²‹qç®zض
›þX¶Ëº·~Šzw?¶ÏŠËú¹º¶ë