[U-Boot-Users] problems about loading linux via u-boot

[刘勇]

   i successfully load uImage into the address 0x100000,
and the command imi is ok.
	after i run the command bootm 0x100000,i get the infomation.

=> bootm 0x100000
## Booting image at 00100000 ...
   Image Name:   Linux-2.6.8
   Created:      2004-09-08   8:49:54 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1009417 Bytes = 985.8 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

the console seems dead.i have set bootargs into "console=ttyS0 root=/dev/nfs"
my cpu is 440gx.it seems linux finish uncompressing,and then it will print
Linux version information.